• If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Sold Stihl MS361(lowered)

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

woodjunkie

ArboristSite Lurker
Joined
Dec 10, 2012
Messages
8
Reaction score
3
Location
Lowell, Mi
Picked up a couple of saws from a friend who no longer cuts wood for heat. I only need one for bon fires and this one is over kill. It runs well, could use a deep clean but otherwise is ready to go. It comes with a 25" bar, two chains, "one chain is almost done, the other near new" and a manual. The video is a cold start. $350 shipped with everything, $325 shipped for just the powerhead, CONUS. Pay Pal ff or add 3%.
 

Attachments

  • 20200510_231537_Film2.jpg
    20200510_231537_Film2.jpg
    1.7 MB · Views: 36
  • 20200510_220009_Film2.jpg
    20200510_220009_Film2.jpg
    1.7 MB · Views: 39
  • 20200510_215819_Film2.jpg
    20200510_215819_Film2.jpg
    2 MB · Views: 35
  • 20200510_220057_Film2.jpg
    20200510_220057_Film2.jpg
    2 MB · Views: 36
  • 20200510_231546_Film2.jpg
    20200510_231546_Film2.jpg
    1.4 MB · Views: 35
  • 20200510_231602_Film2.jpg
    20200510_231602_Film2.jpg
    1.7 MB · Views: 33
  • 20200510_232138_Film2.jpg
    20200510_232138_Film2.jpg
    1.6 MB · Views: 33
  • 20200511_201400_Film2.jpg
    20200511_201400_Film2.jpg
    4.9 MB · Views: 32
  • 20200511_201538_Film2.jpg
    20200511_201538_Film2.jpg
    1.8 MB · Views: 38
  • 20200511_202218_Film2.jpg
    20200511_202218_Film2.jpg
    1.7 MB · Views: 37
I'm not able to upload the video. If interested pm me your email or phone number and I'll send it to you. Thanks.
 
Figured it out...again...lol Evidently I have two accounts... Anyways if anyone can direct me in changing an mp4 (video) to post on here I would appreciate it.
 
Very interested.... I noticed in one of the pics, the bar studs have been removed. Any ideas what's going on there?

Yep, I removed them to take the plate off and make sure everything was cleaned up decent. It's reassembled now. I didn't remove all the plastic and clean it, but it looks pretty good.
 

Latest posts

Back
Top