Round 2 of early spring saws. I have for sale a rebuilt Stihl MS362C-M with custom spikes. Saw has been rebuilt from the case up. Saw is completely OEM, no aftermarket parts. New bearings, oil seals and gaskets. Crank is in great shape, cylinder looks almost new. Compression is good, piston and rings are in good shape too and are mostly broken in but could use a couple more tanks to bring the machine to full potential. Starter assembly is in like new condition with new rope and handle. Handle bar is in good shape, some scuffs and a few small cuts but no cracks. Chain brake works as it should, brake handle does have a small crack on the clutch side. Tank assembly is good, no broken off pieces or leaks. New M-Tronic wiring harness and trigger unit. New choke linkage and HD2 filter. Top cover is new. Mostly everything on the clutch side of the saw is either new or like new. AV buffer mounts are in good shape. Oil pumps works like it should. I have a new 3/8 7T sprocket on it right now but can swap it for something else if you so desire. Before the saw sells I will swap out the inner side plate for a better one. Bucking spikes are new custom made from US steel in Indiana. I painted them with black ceramic paint and high temp/gas-oil resistant ceramic clearcoat. Clutch cover is in good shape but does have one of the chip flap posts busted off. The chip flap still holds in place on the other post, just something to be aware of. No stripped threads or broken mounts, many new screws including new cylinder screws(I use new screws every time when reinstalling cylinders). Saw runs, cuts and oils like it should. Saw is in stock form, no modifications. I ship safely from north Idaho and now use UPS only with saws. Saw will be purged of fluids and have the spikes removed and put in a separate bag. Asking $500 shipped PHO. Please take a look at the photos and check out the video to see the saw in action. If there is something i've left out or you have a question please ask. I take Paypal f&f or standard goods n' services. If you want to use standard goods n' services I kindly ask that you add 3% to the total to cover the paypal fee. Thanks for looking!