Discussion in 'Chainsaw Stickies' started by Four Paws, Nov 7, 2008.
Anyone have a dolmar 5100 piston and cylinder to trade for a 6401 piston and cylinder?
I think this is your nut. If that's not it, look around on their site, I'm confident they will have it. You will need to know the diameter and thread pitch (count).
kris sent me a nut so it's all good
now that i'm here, i'm looking to buy or trade for a 372 full wrap. i would give a whole complete project saw for one with heat. let me know if anybody has one kick'n
I'm looking for an outer pro safety spike for a 394/5. Got parts and PayPal.
I hear a branding iron will cure that ?
Looking for some Husqvarna 55/51 parts:
Drum and bearing
Throttle linkage (with plastic tip)
One of the metal clip that holds the top cover screws in the case
I have a Mac 110 part saw in my pile O junk, is it possible the coils are the same?
I have no idea? Heres what mine looks like.
The only numbers or markings on it are "Type 5"
I have NOS OEM P/N 503 45 39-02 rim-hub-bearing, has on the hub itself 5037260-01 I assume Oregon #. I am not totally sure it fits 51/55 or what but hub looks the same as an NOS 51/55 spur hub which I have also. Any body know what model those part #s belong to for sure ?
If you can give me P/N's to the other parts I may have some of that NOS ?
Come to think of it I did have a 55 carcass, will check for it.
The 503 45 39-02 is correct for the rim-hub-bearing on the 55/51. This set-up usually has a 3/8 rim (I will be running .325 but I can fix that easy enough) so this would work.
The spur sprocket would also work for me if it is in .325 X 7
Throttle linkage: 501 77 80-02
Clutch: 501 45 54-03
Muffler gasket: 503 10 23-03
Clip: 503 22 62-01
Oil pump: 501 77 76-01 (Plastic cover for worm gear)
Any of these parts from a carcass saw would work fine for me also, thanks for checking.....................Ax.
Here is what I have. Do you want condenser too? Anything else you see is fair game.....
Sure! Not sure if I need anything else let me check tonight and see. The saw looked to be lightly used and pretty good shape. Just started looking into it and found no spark so I started there and my son wont quit!
Ok, will set aside until you decide what you want. Yeah, I get the persistence thing......have been caught in that whirlpool more than once....
I'm looking for a condenser part #55987 for a Homelite C52.
I have 42 - 69751 condensers for Homelite C-52
Sorry, mad a mistake with Homelite condenser number on previous reply. Should be 55987 - condenser, also have 55971 - points also.
I'm looking for an ms192t carb. If it needs a rebuild that is fine. I have all kinds of junk to trade or would buy it if the price was fair.
Please PM me. Thanks.
Anybody have a clutch for a Husky 44?
Have junk or green paper to trade.
Separate names with a comma.