I've got 064/066 parts, cylinders for several modern models (Stihl and Husky mostly), a new Dolmar 5100s piston and ring, extra Husky 371/371 case and base gaskets, lots of extra oil seals for several Husky models, and extra ignitions and flywheels for 365/372/372/385/575/044/046/064/066/660. Hit me up with your wish list.
I've also got a bunch of small odds and ends for Stihl 045/056. No ignitons, but I have crankshafts, flywheels, oil pumps and related parts, vibration mounts, fasteners, etc.
I forgot to mention, but I am looking for a switch shaft for my 044. This is the plastic setup that shuts off the saw, controls the half throttle interlock, and choke. There was one on Ebay, but its gone now.
I have a 32" Husky large mount bar, 3/8 .063 105DL Oregon. I will trade for a 28" Stihl or Husky large mount. The Stihl mount is the 026-066, Stihl 3003 pattern. It is in OK shape, has 1 small nick in a rail. I can send pics if you want.
I'll trade you for a 28" large husky mount bar (oregon) with a worn out semi-chisel skip. It's .404x.063. Pretty good shape. Might as well throw in the .404 7 pin rim also. (it's your choice whether your change the tip on the bar or not)
I also need a 365-390 clutch cover (for my 385) and maybe some top end plastics while you're at it. Could use a muffler for that 385 also.
In the market for a 36" plus husky bar (.058 or .063), have a brand new 30" husky large mount 3/8"x.058 bar for trade with a 1/2" worn .058 LGX style full skip chain.
Hmmmm let's see what I have to trade:
015 Stihl - not running complete (carb issue)
301 Echo - excellent shape but not running (carb issue)
Poulan 4000 - good shape runs well
Jred 2159 - like new
Solo 637 - good shape excellent runners
Stihl 026 - oiler not working, runs well...okay shape
16" Oregon bar for Small mount Husky 3/8, .056
Partner 65, 7000, 5000
24" large mount Husky bar
20" small mount Husky bar
Husky 254, 262, 272
bars chains jugz
mac 1-80 24 bar 1/2" chain runz
homey c-5 dead
dolmar 116 lower end
404 36" chain
mac 10-10 ugly runz
stihl 038 lower end new rings no muffler handle bar or plastic
stihl 024c jugs
box of odd ball dawgs
and who the heck nows what else
mystery jred 62?
if you live near central oregon pm me shipping can be a pro with bigger sawz. i look for a bigger stihl 70cc on up= with chain brake
jees sometimes I wish I lived in the US (am in uk)...
I've got a TS760 bottom end (good crank, bearings) including clutch. Could be an 076 case if you had an oil pump...
051 P&C, exhaust - needs rings. Board the mounting holes out to take 6mm bolts for putting on said crank case. A few other 1111 parts - flywheel, ignition, damaged starter and tank, damaged handles, clutch cover etc..
Stihl 30" sprocket nose (standard mount). Good cond. apart from stiff nose (not much ware though)
Old Pioneer 450, good condition (not running yet, but fires), all complete (including original box, tools, chain, paperwork). More details (probably a post) to follow.
Looking for 046 resto project (bottom end at a pinch). Or 038 project (for magnum conversion)
I'm thinking of trading an XP1130G Homelite for a McCulloch 797 or Super 550.
I also have a couple old hardnose Stihl bars in useable condition.
I need an airbox cover for Mac 1-80 and a couple air filters.
I don't have much to trade but have some old David Bradley saw parts. You can take a look at them in the Mystery parts! Mccolluch maybe? thread. Looking for some 028 parts or maybe a repairable fixer uper saw bigger than a 028.