Whats the factory carbuator settings for an "Old Style" Husqvarna 372xp

[Timberjack 230]

Whats the factory carbuator settings for an "Old Style" Husqvarna 372xp

 

[crzybowhntr]

I THINK it is 1 1/4 for each one.

@mdavlee ?

 

[SawTroll]

I THINK it is 1 1/4 for each one.

@mdavlee ?

That used to be the recommended "starting point" - but on a used saw you should arrive at about one turn out on the H and L. At least that's how I reed the attached WS manual (and how it worked on my 2006 one)...

What really matters is of course how the saw sounds and run, 1 1/4 likely is a bit conservative in most cases.