"You Suck" Thread 2019--Pics required!

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.
I visited my father during 4th of july and he decided to hand me down his pride and joy!
It starts up and wont idle properly, I drained the old gas and started looking up info on this saw.
I believe it just needs a thorough carb cleaning.
I joined this board to learn about these older models and get this old saw screaming again.
View attachment 748027
Wow, very nice
 
Just scored these 2 golden oldies off EGay. Will land here @ home early next week. The Jonsered XD. Complete unit. Was $200AUS in running cond, good compression. Just needs flooding issue sorted. The Solo Rex bad boy is a runner with good comp & has custom de-comp valve fitted. It was $150AUS s-l1600.jpg s-l1600 (1).jpg s-l1600 (3).jpg s-l1600 (2).jpg s-l1600 (4).jpg
 
Another running saw followed me home today, a Skilsaw 1629 Type 3, made by PM in Vancouver, BC,. My understanding, is that it is the PM 340 with the Skilsaw logo. I threw a slug of gas into the carb, and it fired immediately.
Tomorrow, I have a line on one of the last production models of the Husky 2100 XP. I promised myself that I wasn't going to buy any more 2100s, but this one is too nice.
Bob
Skilsaw 1629 Type 3_bksm.JPG Skilsaw 1629 Type 3_lh2sm.JPG
 
I was just quoting what some other poster stated in an old post on this site. I did not know enough about the saw to know that the information was incorrect.
My other saw in this family, has the brand name of Skilshop. Do you know why the difference in the names? It was also made by PM, and is a solid yellow colour. I noticed that on both saws, that the reason for the lack of paint is not wear, but because the paint did not adhere well to the body. I am guessing a lack of proper preparation, or just the wrong type of paint.
I also have a PM 380, and it shares the same cream colour, which is also pealing.
Did you restore your saw?

Here is the message I quoted from. No names, no pack drill.
Bob

"pm 340
...been lurking for a couple of days, your saw is how I knew the 1629 was basically a PM 340. Nice job on the resto, btw. I'm amazed you did that with rattle-cans.
And thanks for the tip on ebay, I just grabbed it. I think the reason it broke is that there is no gasket between the port and the muffler."
 
20190619_185643.jpg 20190619_185807.jpg I picked up a SkilSaw 1631 not too long ago and it's a good runner too. At a glance it looks like yours. I think the 1631 is the same as the PM 340. I think I paid 15 bucks for it. Figured it was a good deal for a 69CC saw. The guys say they are kind of slow cutting for a 69 CC saw. Maybe I'll touch up the chain today and see how it cuts?
 
Went to a local neighborhood yard sale today. Standing in a driveway and hear someone ask hey you selling your chainsaw...[emoji848]! Guy says ya i boughtanother one. I go take a look and see an orange case! I ask what model is it so he opens it up and i see a very clean 028av. He tells his buddy he had it at this dealer and paid $150 then to this dealer and paid another $100. Guy asks how much tou want for it? Guy said i want $50! The buddy walks away and i said ill take it. I pay him and he pulls a drawer open on a tool box and pulls out a new 16" Stihl bar and says here take this too! It fired up on the 5th pull and oils well!
e51ccb9805135f438dccac4a4233cbca.jpg
9b8fd1715cca732cc44310938eea7eee.jpg
9786e7ab3eb5a17f870f41a76c0656d8.jpg
fc5a14327663979e8d397736fed5bc21.jpg
66f8f28b9ea4f1cfe4c74ac4ba07e7d9.jpg
dbc5d9519c35f14d4e2a0b01025fb707.jpg
 
Went to a local neighborhood yard sale today. Standing in a driveway and hear someone ask hey you selling your chainsaw...[emoji848]! Guy says ya i boughtanother one. I go take a look and see an orange case! I ask what model is it so he opens it up and i see a very clean 028av. He tells his buddy he had it at this dealer and paid $150 then to this dealer and paid another $100. Guy asks how much tou want for it? Guy said i want $50! The buddy walks away and i said ill take it. I pay him and he pulls a drawer open on a tool box and pulls out a new 16" Stihl bar and says here take this too! It fired up on the 5th pull and oils well!
e51ccb9805135f438dccac4a4233cbca.jpg
9b8fd1715cca732cc44310938eea7eee.jpg
9786e7ab3eb5a17f870f41a76c0656d8.jpg
fc5a14327663979e8d397736fed5bc21.jpg
66f8f28b9ea4f1cfe4c74ac4ba07e7d9.jpg
dbc5d9519c35f14d4e2a0b01025fb707.jpg
That's a looker
 
Went to a local neighborhood yard sale today. Standing in a driveway and hear someone ask hey you selling your chainsaw...[emoji848]! Guy says ya i boughtanother one. I go take a look and see an orange case! I ask what model is it so he opens it up and i see a very clean 028av. He tells his buddy he had it at this dealer and paid $150 then to this dealer and paid another $100. Guy asks how much tou want for it? Guy said i want $50! The buddy walks away and i said ill take it. I pay him and he pulls a drawer open on a tool box and pulls out a new 16" Stihl bar and says here take this too! It fired up on the 5th pull and oils well!
e51ccb9805135f438dccac4a4233cbca.jpg
9b8fd1715cca732cc44310938eea7eee.jpg
9786e7ab3eb5a17f870f41a76c0656d8.jpg
fc5a14327663979e8d397736fed5bc21.jpg
66f8f28b9ea4f1cfe4c74ac4ba07e7d9.jpg
dbc5d9519c35f14d4e2a0b01025fb707.jpg
Dayam! You win major suckage for the week.
 
I was just quoting what some other poster stated in an old post on this site. I did not know enough about the saw to know that the information was incorrect.
My other saw in this family, has the brand name of Skilshop. Do you know why the difference in the names? It was also made by PM, and is a solid yellow colour. I noticed that on both saws, that the reason for the lack of paint is not wear, but because the paint did not adhere well to the body. I am guessing a lack of proper preparation, or just the wrong type of paint.
I also have a PM 380, and it shares the same cream colour, which is also pealing.
Did you restore your saw?

Here is the message I quoted from. No names, no pack drill.
Bob

"pm 340
...been lurking for a couple of days, your saw is how I knew the 1629 was basically a PM 340. Nice job on the resto, btw. I'm amazed you did that with rattle-cans.
And thanks for the tip on ebay, I just grabbed it. I think the reason it broke is that there is no gasket between the port and the muffler."

my 340 is not restored.
your skilshop looks like either. i have a hard time tellin the 1629 from 1631 w/o seein top.
pic of 380?
i got 2 others - 270 & 360, both 95cc, both repaints, as they were wrong colors when i got em.

IMG_1076.JPG IMG_1214.JPG

paid $50. ea. but they both got some time in em.
 
20190803_152208.jpg 20190803_152220.jpg
Saw a CL ad for a 10-10 and called the man to look at it , list for 100$ he told me he had a pro mac 55 in non running condition but that doesn't stop me .
Bothe saws have great compression and the 55 pops off with prime ( its had a ham fisted life though.) The 10-10 just runs but needs tuned . After talking to the guy at his house for awhile he asked what I'd give for the both of them and I offered 80.00 ? Done deal!
Being that I felt like I got a good deal I asked him if I find some saw stash some time if he was interested in a brand ? I off handily said old poulans? He said "no" and made me take a 3400 antivbe for asking!20190803_152330.jpg
 
my 340 is not restored.
your skilshop looks like either. i have a hard time tellin the 1629 from 1631 w/o seein top.
pic of 380?
i got 2 others - 270 & 360, both 95cc, both repaints, as they were wrong colors when i got em.

View attachment 751100 View attachment 751101

paid $50. ea. but they both got some time in em.
might be repaints, but they are lookers!
 
Status
Not open for further replies.
Back
Top