"You Suck" Thread 2019--Pics required!

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.
A deal went through and my brother got a pair of 2100's, one with 20hrs and one with 100hrs, a pioneer 1200A, a Skilshop, a poulan 35cc, 3 extra bars, 80 feet of 404 chain, and a new 3/8 sprocket for $600. All of them fire/run except for the poulan which is currently untouched. I get the poulan now for free and maybe I will be able to buy the 100hr 2100 later. The 20hr one is complete save for a dog, it just doesn't have the green weenie, bar, or chain installed yet.IMG_3046.jpg IMG_3047.jpg IMG_3048.jpg IMG_3049.jpg IMG_3050.jpg
 
Picked these guys up this morning, didn't exactly steal them, but they all have good compression and will be runners. Gave $250 for the 4 saws and a box full of miscellaneous parts and a few bars and chains. Husky's are all 266's Poulan is a 306a.
551024577d08ae4fd18353af313dc2ae.jpg
 
Picked these guys up this morning, didn't exactly steal them, but they all have good compression and will be runners. Gave $250 for the 4 saws and a box full of miscellaneous parts and a few bars and chains. Husky's are all 266's Poulan is a 306a.
551024577d08ae4fd18353af313dc2ae.jpg
Yep ,You stole em
 
Walked into a pawn shop I drive by a lot and rarely have time to stop. Grabbed this saw off the shelf outside and fired it up. Tag said $250 “well used” I looked it over and it doesn’t look well used, probably 15 tanks?
I milled around a while and on my way out I offered them $200. They accepted. Out the door for $200 with my ag/timber card On file. Ms361 needs the chain sharpened and the bar won’t go for long. Idle is set a smidge high but otherwise its in a good state of tune and ready for work.
46F142B4-9A73-4B97-9E19-0373742FBE72.jpeg
 
Status
Not open for further replies.
Back
Top