• If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Want to Buy Stihl ms 460 magnum parts

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

262freak

ArboristSite Operative
Joined
Aug 13, 2020
Messages
171
Reaction score
24
Location
nc
Needing a few parts to finish a pair of ms460's
1. OEM or Meteor MS 460 magnum cylinder kit or cylinder.
2. top, carburetor plate, and air filter plastics in good shape. x2
3. MS460 magnum stickers and decal set. x2
4.starter cover and assembly in good shape.
5. fuel and oil flippy caps. x2
6. chain adjuster hardware. x2
7. bar stud set. x1
8. bar base plate x2
9. Flywheel x1
10. Mufflers and heat deflectors. x2
11. HO adjustable oiler with grommets. x2
12. clutch, rim sprocket, complete brake hardware, and brake flags in nice condition. x2
13. west coast/large sprocket covers. x2
14. full wrap handle or west coast 3/4 wrap handles. x2
15. Large bucking spike set. x2
16. 24-28" bars 3/8 .050 used bars. x2
17. air filter and carburetor screw down rod.
18. very nice or nos tank.
some of the parts such as plastics i will consider AM but others i prefer OEM just pm me anf ask if unsure.
 
I have a beat up 046 that had a tree dropped on it. Handle/tank no good but a look in the muffler appears P/C is in good shape, as is crankcase.

I would have to clean it up as it's filthy, but might be a complete P/C on a crankcase that just needs a cleanup/seals/rings.

If interested, let me know and I can investigate further. All parts are OEM Stihl
 
With a parts list that long, seems like it'd be better as a parts saw?
 
Not an easy thing to find, most rebuild them.
They are a common saw.

I understand rebuilding, but sounds like there's not much of this saw!

The rear handle/tank alone is around $150.

I have 3 of them. Great saw and since they are now a few models old, can be bought for $400-500.
 
Actually I picked up two more ms460s all I need is mufflers, top handles, sprocket, clutch, oiler, and sprocket covers all x3
 
They don't need tanks was just wanting to see if there where nicer ones. Two of them have nos cylinder kits all they really lack is the plastics
 
Back
Top