Djbasl
ArboristSite Lurker
I’m finally clearing out more stiff I just don’t use anymore. However, I am open to
input of what it might be worth to sell. What I have is an 084 Stihl magnum with enlarged exhaust cover ports, stack style intake (2 extra filters as shown) the motor has less than 2 hours after Madsens up in Washington went through it about 8 yrs. ago. I run it a couple times a year to keep it loose. No cracks or breaks in the plastic, sprocket cover etc. full wrap pro safety bar is in good shape. Chain break works fine. Saw since new has always had good Fuel mix. Also included is a barely used 36” Stihl bar and chain (063 in 404). Additional long bars included are: Stihl compatible 60” (I believe champion brand) bar with super clean rails, a good tip with two 063 in 404 full skip chisel bit chains that are freshly ground (Both chains were pieced together out of good extra chain I had) last, a Stihl compatible 50” inch Oregon brand .058 (barely used) roller nosed bar that comes with 2 brand new 058 in 404 full Skip chains. Any input is appreciated. Thx!
input of what it might be worth to sell. What I have is an 084 Stihl magnum with enlarged exhaust cover ports, stack style intake (2 extra filters as shown) the motor has less than 2 hours after Madsens up in Washington went through it about 8 yrs. ago. I run it a couple times a year to keep it loose. No cracks or breaks in the plastic, sprocket cover etc. full wrap pro safety bar is in good shape. Chain break works fine. Saw since new has always had good Fuel mix. Also included is a barely used 36” Stihl bar and chain (063 in 404). Additional long bars included are: Stihl compatible 60” (I believe champion brand) bar with super clean rails, a good tip with two 063 in 404 full skip chisel bit chains that are freshly ground (Both chains were pieced together out of good extra chain I had) last, a Stihl compatible 50” inch Oregon brand .058 (barely used) roller nosed bar that comes with 2 brand new 058 in 404 full Skip chains. Any input is appreciated. Thx!