• If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Want to Buy WTB: 100+CC milling saw

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I just had a look at this thread and had some thoughts. A brand-new Stihl MS 880 goes for at least $2000. The mill set-up is at least a few hundred. But you can buy a basic bandsaw mill with a 10' track for less than$3000. Sure, the cheaper mills lack some of the features of the more expensive ones and take more effort to use. But they will outperform any chainsaw mill in speed, effort and net wood yield (1/8" kerf vs 3/8" kerf.) Not sure what the attraction is for a chainsaw mill.
Portable
 
Unless you are truly milling in the middle of the woods or slabbing the advantages of a bandmill far outweigh the portability of a chainsaw mill. That is simply my observation
Sure does. Still worthless if your not moving big logs. Most bands couldn't handle large slabs. I don't mill 2x anything but small slabs under 24". The stuff over 32" tends to be over 12' and three inches plus thick. Bar tops can go 30ft. Try that on a band saw with a 4'x25' log, enjoy.

Two different tools is my best answer for completely different jobs.
 
You apparently did not see what I wrote when I said........................Unless you are truly milling in the middle of the woods or slabbing..................but heck who cares. What works for you works for you and that is the great thing about options. We do not have to be clones.
 
As the title states I am looking to buy a 100+cc milling saw, even just a power head.

It can be a project or a brand new complete saw, just let me know what you have.

Just a note, Disstons are 249cc, 9.1KW, two cylinder.
7' bars were available, longest i've found is 5' on the east coast.
But yeah, still have not finished mine, either.

:(


Also mechanically easy to put a power head on both ends of the bar.
It's been done for sawing contests.
Probably more dangerous (broken chain) than useful, though.
 
Just a note, Disstons are 249cc, 9.1KW, two cylinder.
7' bars were available, longest i've found is 5' on the east coast.
But yeah, still have not finished mine, either.

:(


Also mechanically easy to put a power head on both ends of the bar.
It's been done for sawing contests.
Probably more dangerous (broken chain) than useful, though.
I am a dedicated vintage saw guy but I will tell you a KB7 is the furthest you ever want to mill with. They are fun to play with but when work needs done WORK needs done.... As for a double ender there is an ole logger down in Missouri that runs a couple double ended Disstons at a show in September
 
While the KB7 does exceed your 100cc requirement by a mite, I don't think 3/4" chain is exactly narrow kerf, though I could be mistaken. Harvester chain is kinda hard on those old timers that used less aggressive chains such as scratcher. Though full chisel does make for a more impressive display. If you want useable brute power, a 090g, 797g, or 3100 are the tops in my book.
 
I have a really nice low hour partner p100 super I am thinking of selling/trading. It's now a PHO as I wrecked my truck (solo vehicle accident) that had the 36in partner branded bar and chain sitting in the back seat. So it would just be the power head only. But it's 100cc of vintage muscle The tow yard wanted 385 to get anything out of the truck other than my actual id/cards (that for what ever reason I decided to hide under my floor mat after accident, shouldn't have been driving obviously)
 
Back
Top