• If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Want to Sell Poulan parts

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Dec 2, 2007
Messages
19,280
Reaction score
9,449
Location
NW Indiana
I'm going through stuff around here and I have a bunch of Poulan parts that need to be moved. I have a lot of 306/245 stuff, cranks, recoils, oiler parts, full flywheels and electronic coils, handles etc. Some NOS parts. Just dont ask for 245 pistons and cylinders.
I'm probably going to be moving some saws, 306, 361, 245 type. Mostly relabeled collector saws.

I also have a ton of S25 and Micro series used and NOS parts.

I have a bunch of new and some slightly used 12", 14", 16" and 18" A041 mount 3/8LP bars for the Micro, S25 and Wildthing type saws. I have new chains to go with them if needed as well.

Message what you need and I will check and see that I have it. I will ship. Be aware that shipping is what it is and I'm not taking the time to quote every little shipping rate till your ready to buy.
 
@Modifiedmark

Do you know what size the bar slot is for those three rivet sprocket nose grey bars?

Liking your GB twelve inchers above. Oil feed holes are not a concern to me if they get used elsewhere. I know how these work.
They are PO mount, so Poulan/Echo etc, like a Oregon A041. 5/16" slot. If your intersted, let me know, I got 2 other goofballs jacking me around on those.
 
What will you take for it? Do you have any clue if it is ready as is?

Its on a parts saw that's been laying in a box for 10 years. Sounds like that's not what your looking for.

I may put a price on something in a listing to begin with but otherwise I don't discuss prices/negotiations in a open forum. That's what PM's are for.
 
What will you take for it? Do you have any clue if it is ready as is?
If ModifriedMark can't help you out with the carb I have several off of running saws just lmk, im not trying to butt in on anyone's deal so if you can't find one then msg me
 
I'm looking for an air filter for a Poulan 5200, 245a, and one for a 3400 as well. I'm not sure what it's called but I'm also looking for the part of a 245a that comprises the rear handle and chamber the carburetor sits in.
 
I'm looking for an air filter for a Poulan 5200, 245a, and one for a 3400 as well. I'm not sure what it's called but I'm also looking for the part of a 245a that comprises the rear handle and chamber the carburetor sits in.


I have plenty of the rear handle/tank assemblies. Good luck on the 5200 air filter. I don't have any 245 filters to spare. I may have a 3400 but I think you can still get new aftermarkets for those.

I'm going to be out of town for a few days, send me a PM later in the week.
 
I have plenty of the rear handle/tank assemblies. Good luck on the 5200 air filter. I don't have any 245 filters to spare. I may have a 3400 but I think you can still get new aftermarkets for those.

I'm going to be out of town for a few days, send me a PM later in the week.
im looking for a Poulan 245a handle, muffler cover, air filter cover, and gas filter cover do you have any of those for sale?
 
Back
Top