2101xp/ top all time muscle saws!!!!!!!!!!!

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Nice, u still use them?
Yes, but COVID changed my whole landscape. Before I was contracting out clearing jobs and dealing with 'problem trees' etc. Things slowed to a crawl and now nada. I'm not sure why I lost all that business. I'm retirement age anyway now, but I'd still like to pick and choose.

I know how it is.....I start getting rid of saws, then the work comes back.....;)


Kevin
 
Nice, u still use them?
In anything over three ft, they're king. They even outpace my Jonsered 2094 and that's saying a lot. But you have to be in wood over three ft to beat that J'red.

It doesn't hurt the 2100 to tune over 11,000rpm. I run mine about 11,300rpm with the governor plugged.

Kevin
 
In anything over three ft, they're king. They even outpace my Jonsered 2094 and that's saying a lot. But you have to be in wood over three ft to beat that J'reds.

It doesn't hurt the 2100 to tune over 11,000rpm. I run mine about 11,300rpm with the governor plugged.

Kevin
They certainly are a legend in Husky lore with the old fallers . Certainly enjoy running mine . 752117BF-D2BB-4007-ABEC-2E06E28E4E78.jpeg
 
They certainly are a legend in Husky lore with the old fallers . Certainly enjoy running mine . View attachment 1052257
In the past, I posted the lore and how they came into being. I was there and bought early production models. Stihls were on most of the loggin' shows I worked at until the 2100 came out. Then it became a sea of orange, even when I moved to CO.

I started out life with an 075, and what a heavy piece of junk by comparison.

You guys slave me with those 'D' handles and velocity stacks. No one has been able to prove any significant gain with a velocity stack on a 2100 and I've seen computer-generated flow/gain tests. You would have been laughed outa the woods with those handles, but yeah, I get it. At 70, I have no problems pulling over the 2100's. Usually, I plug any saw with a comp relief because I've seen them gunk up and rob compression. But whatever floats your boat!

Kevin
 
In the past, I posted the lore and how they came into being. I was there and bought early production models. Stihls were on most of the loggin' shows I worked at until the 2100 came out. Then it became a sea of orange, even when I moved to CO.

I started out life with an 075, and what a heavy piece of junk by comparison.

Kevin
Did you ever run one of these, kinda has its own lore in the PNW . 7076F92C-F98E-4166-9139-8447EEB39424.jpeg
 
Did you ever run one of these, kinda has its own lore in the PNW . View attachment 1052260
When I came into it, MAC's were mostly relegated to landing work. The old timers that ran them either retired or switched to Swedish/German saws. Maybe that didn't hold true on every loggin' show in the PNW, but I tramped around and worked quite a few. I heard about the big MAC's and the Homelites, of course.....just didn't see them on the shows.

You gotta understand that before quasi-synthetic oil mixes came out like Powerpunch, you only got about a season on a fallin'/buckin' saw. Except on private timber sales, you didn't see loggers hauling around old saws. And no one was gonna buy a MAC if the word was a 2100 could run circles around it. Admittedly before the 2100 came out, The Homelites and the MAC's took out a HUGE amount of PNW timber.

Homelite and MAC had the technology and wherewithal to compete against the Swedes/Germans, but MAC's owner sold the business and the two companies decided that homeowner saws were where to be....sad, but true.

Kevin
 
Back
Top