breaking in a new saw

sloth9669 · Nov 27, 2006

Iam thinking that iam going to pull the trigger on an new 044 stihl and was wondering if there is any kind of recommend break in period on the saws or start it up and let'er rip like your gonna use it for the next 5 years ?

CaseyForrest · Nov 27, 2006

Yes, but dont let it run wide open out of the cut. If you are going to keep the trigger buried, keep it in the wood.

sloth9669 · Nov 27, 2006

yes ???

Yes run it like i will for the next 5 years just keep it in wood.....and when can i take it out of the wood and use high rpm like in smaller wood or limbs when the rpm is up and not much wood cut ?

CaseyForrest · Nov 27, 2006

You should get at least a gallon through it. After say 2-5 gallons you can consider the saw broken in.

DOLMARatOs · Nov 28, 2006

I tell customers to run the saw for no more than 10 or 15 minutes at a time then let it cool off for 5 or 10 minutes the first 2 times that it is run. I'm an old RC nut and that seems to help with stabilizing the thermal shock of heating up the cylinder / piston. Also, if there is a small problem, they aren't running three tanks of fuel with a damaged saw and making things much worse. My $0.02

breaking in a new saw

Help Support Arborist Forum:

sloth9669

ArboristSite Guru

CaseyForrest

I am NOT a tree freak.

sloth9669

ArboristSite Guru

CaseyForrest

I am NOT a tree freak.

DOLMARatOs

ArboristSite Operative

Similar threads

Latest posts

breaking in a new saw

Help Support Arborist Forum:

sloth9669

ArboristSite Guru

CaseyForrest

I am NOT a tree freak.

sloth9669

ArboristSite Guru

CaseyForrest

I am NOT a tree freak.

DOLMARatOs

ArboristSite Operative

Similar threads

Latest posts

Join the conversation!

Join today and get all the highlights of this community direct to your inbox. It's FREE!