Lookin' for a Nipple... (PM6)

Not what you chuckleheads are thinkin'... LMAO

I have an old Power Mac 6. Made in the late 60's early 70's. My old man bought it new back in '70 or '71 I believe. Anyhoo... I am putting it back together after taking it apart for a good cleaing. The little bugger runs like a top... but leaks fuel everywhere.

The little rubber nipple that goes from the tank into the carb inlet I assume has shrunk over time and not sealing properly into the inlet. It's attached to some weird fibrous filter inside the tank. Looks like a PITA to change... but I need one.

Anybody here have a lead on a fuel tank nipple for this little saw? Here are a few pics...







Gary

thats a good old climbing saw tom trees

Yep mee too

gary i have some of them

lawnmowertech37 said:

gary i have some of them

Click to expand...

You was the first to come to mind. I figured you would.

This is what most of us were thinking lol

Thanks Calvin... I sent ya a PM...

LMAO... that pic has a life of it's own...

Gary

GASoline71 said:

Thanks Calvin... I sent ya a PM...

LMAO... that pic has a life of it's own...

Gary

Click to expand...

Yeah...we're all waitin' to hear whether or not you checked her oil...




.

scotclayshooter said:

This is what most of us were thinking lol

Click to expand...

Woodie said:

Yeah...we're all waitin' to hear whether or not you checked her oil...




.

Click to expand...

Insert "dip stick" joke here: ___________________________

Gary - measure that nipple (the saw)... I'm sure I can find something that will fit with a dab of JB..

Lakeside53 said:

Gary - measure that nipple (the saw)... I'm sure I can find something that will fit with a dab of JB..

Click to expand...

That's what she said.

Poor Gary..... Like Nixon (I'm not a crook"), history will always remember Gary for that stare...:greenchainsaw:

lawnmowertech37 said:

gary i have some of them

Click to expand...

Calvin... I can't remember if I PM'd you about this part or not... I looked in the saved PM's I have and it's not there.

Anyways... still have them available?

Gary

GASoline71 said:

Calvin... I can't remember if I PM'd you about this part or not... I looked in the saved PM's I have and it's not there.

Anyways... still have them available?

Gary

Click to expand...

i have only one that is the nipple for the saw

Sounds like a $20 nipple then......

is this an old thread from december 08 or is the date messed up.

so is that gary mesn with saw when he should be msn with the hot girl

Gary, does your saw have the 1/4 or 3/8LP clutch and sprocket?

Evan said:

is this an old thread from december 08 or is the date messed up.

so is that gary mesn with saw when he should be msn with the hot girl

Click to expand...

It's and old thread... I've already "messed" with that hot girl...

ms460woodchuck said:

Gary, does your saw have the 1/4 or 3/8LP clutch and sprocket?

Click to expand...

It has 1/4"...

Gary

good deal