044

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. revving13500

    New to me 044

    Picked up this 1989 (+/- 1year) 044 recently. It wasn’t oiling the bar when I first got it. I’ve replaced the oil pump and it works now but leaks when sitting so today I’ll be taking it back apart to make sure the rubber o-rings are seated properly. The saw runs great otherwise. I got a bark...
  2. atimen

    Another attempt at salvaging the oem 044 cylinder

    Hello everyone, Can I ask you for your opinion on whether this oem cylinder on the 044 12mm pin can be salvaged? I've been trying to manually remove the grooves from the stuck piston for about 4 hours now, I got a new oem piston but I don't know if it makes sense to continue or if I should just...
  3. Lightning Performance

    Withdrawn MS441 mostly complete

    .
  4. Lightning Performance

    Want to Sell MS441 mostly complete

    Needs work. Broken AV pin on the tankhandle upfront underneath. It can be fixed. Stripped upper cylinder AV spring hole mount. Now fixed Side AV rubber hammered. See pics. Runs, no serious damage to it so it can be fixed up. Pumps oil starts fine. Sale as is. It's complete minus the broken...
  5. Nazjaz

    Stihl 044 slant fin cylinder viability

    I got this 044 for free. It seems like relatively low hours; my brother just left it stored in direct Arizona sunlight. The rings were galled on to piston on the exhaust side. I was considering a Hyway big bore kit or Meteor. Upon more research some recommended trying to salvage the original. I...
  6. D

    Serial number info and 10mm or 12mm wrist pin on an 044

    Hello all, I am rebuilding my dads 044 saw. I need to know if it is 12mm or 10mm wrist pin, serial number is 119515513 also, what else can you tell me about this saw using the serial number? Thanks for the info!
  7. Tree Feller

    044 or 440?

    So I don’t know a lot about these saws. I was thinking of a nice old school 044? Just always wanted one. But should I pick up a 044 or 440? Is the power and weight about the same? Is there one advantage over the other?? Thanks!
  8. huskyslinger

    Sold Stihl 044/440 Stihl sale pending"

    As you can see there is one aftermarket. $15 for am $30 each for the others. Come on gents want these gone. Ill cover shipping
  9. huskyslinger

    Sold Stihl 044/046/440/460/064 parts

    Brand new stihl 460 covers, new chain catcher. $30 for covers, $7.50 for chain catcher.
  10. R

    Sold *PENDING SALE* Stihl 044 - 10mm saw

    Stihl 044 with 20” bar and new Oregon PowerCut chain. I am 2nd owner after buying from a cousin’s estate 2 years ago. Has been a firewood and farm saw all its life and never abused as you can see in pics. Runs strong just have too many saws so this one doesn’t get used much. Based on my...
  11. C

    Could not believe it !!!!

    A guy in the Richmond VA area had a listing on Craigslist for a stihl 044 chainsaw for $100 , so im assuning it needed to be rebuilt or something major was wrong with it , well i drive a hour (one way ) to meet him. He gets the saw out , and i see that its complete with a 20 in bar and chain on...
  12. L34

    044 Squish

    Hi all, Most of you guys do a gasket delete on the 044's. So what is a standard squish measurement before the delete .30-.35? Cheers,Chris.
  13. Overkill338

    Sold Hyway Dualport Muffler for 044/046

    $30 shipped
  14. Cuzjr

    Sold Stihl 440

    Stihl 440 for sale. The saw belongs to a customer. He brought it in for carb issues and asked if I could help him sell it. I cleaned the carb and put a kit in it and tested. Saw runs good and is in good shape overall. It will come with a 20" bar. Feel free to make an offer as he no longer needs...
  15. Cuzjr

    Sold Stihl 440 magnum

    I've got a Stihl 440 magnum that belongs to a customer who asked me to help him sell it. I put a carb kit and fuel filter in it and gave it a quick tune. The saw cleaned up pretty good and has good compression (170 +/-). It will come with a 20" bar. Haven't personally used this saw so this is...
  16. Cuzjr

    Sold Stihl 460

    I've got a Stihl ms460 magnum in good used shape, 170 lbs on compression. Runs great and oils as it should. I bought this one in a lot of 6 running saws a few days ago. The only thing I've done to it is cleaned it up and inspected it well, it cranks on 3rd pull when cold and 1st when warm. Has...
  17. quattro90

    Sold Stihl 044 K&S Slantfin Cylinder

    Stihl 044 K&S Slantfin Cylinder in great condition. $100 shipped in continental US except those in PST or International (will provide exact price shipping quote.) Just PM for any questions. Cheers!
  18. quattro90

    Sold Stihl 044 Parts

    SOLD
  19. quattro90

    Sold Stihl 044 K&S P/C Long Block Slantfin

    Stihl 044 K&S P/C Long Block. Crank turns over smoothly. Slight bit of play on flywheel side bearing. No scoring visible on P/C. Case bottom is in mediocre condition and shows wear. See pictures $75 shipped in lower 48 except for Left Coast (PM for shipping quote). PM with any additional...
  20. X

    Want to Buy Stihl 20/260 variant or 036/360 varient

    Im looking for a Stihl saw in either a 026/260/261 and the like or a 036/360/361/362. Not picky on much, just looking for a clean saw at a good price. i would even go for a 044/440/441 if the price is right. Bar length is not a major detail to me either. Thank you!
Back
Top