461

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. Lightning Performance

    Withdrawn MS441 mostly complete

    .
  2. Lightning Performance

    Want to Sell MS441 mostly complete

    Needs work. Broken AV pin on the tankhandle upfront underneath. It can be fixed. Stripped upper cylinder AV spring hole mount. Now fixed Side AV rubber hammered. See pics. Runs, no serious damage to it so it can be fixed up. Pumps oil starts fine. Sale as is. It's complete minus the broken...
  3. H

    Want to Buy Looking to buy a used Stihl 460/461/462

    Let me know if you have one with good compression.
  4. M

    Loctite on Wrap Around Handlebar, Stihl 461

    Greetings, I just installed a full wrap on a 461, but out of curiosity I looked up torque specs in the repair manual, as the screws go right into plastic, which seems like a horrible design. Anyway, long story short, the torque wrench you'd need costs like 400 dollars and nowhere I know rents...
  5. Overkill338

    Want to Sell Aftermarket Pistons

    Hyway pistons, that I'm not going to be able to use. So I'd like to move them all out. $28 shipped EACH MS261 popup 036 Popup MS461 Popup Then I have these two. I can't even remember what they go to. One flat top, the other is a popup, and both 52mm
  6. User Name Here

    Sold MMWS Stihl MS 461

    I've got my Masterminded 461 up for sale. Hasn't got a lot of run time on it, 7-8 cords. Runs awesome, strong saw and everything works as it should. I can sell as PHO or include a 28" bar and chain. Probably have 2 or 3 chains I'll let go. I bought this saw new and sent it to Randy after a...
  7. NoDakFire

    Factory Idle Speeds

    I'm trying to make a cheat sheet or pocket card for the guys at work to use when tuning saws. I'm having trouble tracking down the suggested idle settings for a few models that we own. I know tuning to ear is a better practice, but I need a quantifiable range to use as a baseline for the ones...
  8. Overkill338

    Stihl High Output Oilers (461 & 661)

    Recently there was an argument in our FB group about the "R" models having the high output oiler. Some people argued that all 461s and 661s come with the HO oiler regardless of the wrap handle or not. So in case of any confusion for people searching about it, here is the definitive answer.
  9. User Name Here

    Sold NLFS

    I have a Stihl 461 PHO ported by Mastermind Worksaws. It has an unlimited 460 coil and muffler outlet has been opened up. I'm the only owner. The saw runs great, has only been used for firewood - probably 6-7 cords of run time since new. I don't have compression reading but am posting piston...
  10. KB1LTG

    Want to Sell Vintage Stihl 045AV, 460 Magnum, 066 Magnum, 066

    Here are some Stihl saws that have been stored in a workshop of a neighbor who can no longer use them due to age and injuries. They were put up a few years ago with fuel (non- ethanol) in the tanks and oil in the bar oil tank. I have 1 side plate not shown for the 066 saws. I Don't know...
  11. CodyHighClimber

    Want to Buy WTB 460 or 461 parts saw

    I’m looking for a 460 or 461 parts saw. I have a good block and jug but that’s it. Need plastics, carb, ignition, handle, I really need everything minus the block and jug lol. If anyone has anything let me know thanks.
  12. wildman ben

    Sold MS461VW arctic wrap PHO 600USD you ship

    461 fully wrapped, heated handles and carb used for a few months falling, then switched full time to husky. saw runs good and strong. may also trade for something 60cc+ that is spring AV. the bushings is what's getting me away from this saw haha. if you are in the southern B.C. area or northern...
  13. wildman ben

    461 anti vibration

    Hello all, So I run a 461 magnum arctic saw, about 8 hours a day for 14+ day hitches and the vibration really gets to me, hands / arms get all numb and tingly, tried anti vibration gloves but they are so thick and just not ideal. I've seen after market bushings on jackssmallengines but don't...
  14. A

    Rebuild a pooched 461 or buy used 661?

    Hi All, I’m not much of an internet forum guy but I’ve been to this site several times in the past year and now (unfortunately) have a question for the group. Fantastic site, by the way. Reading a couple threads about the Stihl 461 as compared to the 661, I set my eye toward a 461 a few...
  15. User Name Here

    MMWS Stihl 461 vs. Dolmar 7900 ported?

    I currently have a Stihl 461 ported by MMWS. I love the saw! It cuts great, starts easily and is a very fun saw. Now here's where the question comes in. I have always been partial to Stihl. I know this is a very debated topic as to whether Stihl is the best or not - I like them and never had...
  16. S

    Sold 3/4 wrap handle, 046, 460, 461

    Hey guys, I bought a new 461R. The 3/4 wrap wasn't for me. Made about 10 cuts before I made the switch to the 1/2 wrap. So it's like new. Make me a decent reasonable offer plus shipping.
  17. S

    New Saw today...

    Long time lurker, first time poster here. But I figured today was a good day to start since my new 461 Wrap model came in! I'm very excited.
Back
Top