• If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Want to Buy 056 Super 54mm piston and cylinder with factory angled fins.

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Piston Honda

ArboristSite Member
Joined
May 8, 2020
Messages
67
Reaction score
28
Location
Everett WA
I'm looking for a 056 54mm piston and cylinder. I have the dual port muffler so I need the cylinder that has the angle cut fins on the left side of the exhaust port.
I look forward to replies.

Thanks.
 
I have piles of 056 parts so It might be best to post a picture of what you mean by angle cut fins
Oh cool. I have an 056 Super build/restoration im doing. Might have to do some business together.
I'll post some pics tomorrow. The fins are cut/cast just like the 056 magnum 56mm cylinder but the one I have is a 54mm.

Thanks Bill.

Piston.
 
I'm no expert but I do believe have enough knowledge in the casting, machining, and metal fabrication world after 35 years to make an educated assumption that that cylinder strongly appears to be factory "cast" with those fins in a 45° angle and not "cut."
 

Attachments

  • 20220625_055039.jpg
    20220625_055039.jpg
    876.8 KB · Views: 0
  • 20220625_055104.jpg
    20220625_055104.jpg
    987.8 KB · Views: 0
  • 20220625_055120.jpg
    20220625_055120.jpg
    910.8 KB · Views: 0
  • 20220625_055138.jpg
    20220625_055138.jpg
    838.7 KB · Views: 0
  • 20220625_055304.jpg
    20220625_055304.jpg
    992.8 KB · Views: 0
  • 20220625_055027.jpg
    20220625_055027.jpg
    1.2 MB · Views: 0
Here's some close up to get a better account.
 

Attachments

  • 20220625_062209.jpg
    20220625_062209.jpg
    348.7 KB · Views: 0
  • 20220625_062111.jpg
    20220625_062111.jpg
    275.3 KB · Views: 0
  • 20220625_062125.jpg
    20220625_062125.jpg
    297 KB · Views: 0
  • 20220625_062149.jpg
    20220625_062149.jpg
    384.2 KB · Views: 0
  • 20220625_062226.jpg
    20220625_062226.jpg
    298.3 KB · Views: 0
  • 20220625_062258.jpg
    20220625_062258.jpg
    370.5 KB · Views: 0
Oh cool. I have an 056 Super build/restoration im doing. Might have to do some business together.
I'll post some pics tomorrow. The fins are cut/cast just like the 056 magnum 56mm cylinder but the one I have is a 54mm.

Thanks Bill.

Piston.
Here's some pics Bill. 👍
 

Attachments

  • 20220625_055039.jpg
    20220625_055039.jpg
    876.8 KB · Views: 0
  • 20220625_062209.jpg
    20220625_062209.jpg
    348.7 KB · Views: 0
  • 20220625_062149.jpg
    20220625_062149.jpg
    384.2 KB · Views: 0
  • 20220625_062125.jpg
    20220625_062125.jpg
    297 KB · Views: 0
  • 20220625_062111.jpg
    20220625_062111.jpg
    275.3 KB · Views: 0
  • 20220625_055304.jpg
    20220625_055304.jpg
    992.8 KB · Views: 0
  • 20220625_055138.jpg
    20220625_055138.jpg
    838.7 KB · Views: 0
  • 20220625_055120.jpg
    20220625_055120.jpg
    910.8 KB · Views: 0
  • 20220625_055104.jpg
    20220625_055104.jpg
    987.8 KB · Views: 0
  • 20220625_055027.jpg
    20220625_055027.jpg
    1.2 MB · Views: 0
A few more.
 

Attachments

  • 20220625_062149.jpg
    20220625_062149.jpg
    384.2 KB · Views: 0
  • 20220625_062209.jpg
    20220625_062209.jpg
    348.7 KB · Views: 0
  • 20220625_062226.jpg
    20220625_062226.jpg
    298.3 KB · Views: 0
  • 20220625_062258.jpg
    20220625_062258.jpg
    370.5 KB · Views: 0
  • 20220625_063442.jpg
    20220625_063442.jpg
    373.4 KB · Views: 0
Yes. I understand that. I have a bone stock original 056 Super that came with the exhaust with the secondary port, and that is the reason I'm searching for a 54mm cylinder with the fins that are cast, from the factory, at a 45° angle. I've found several 54mm cylinders that don't have the angled fins. I've also found a few 54mm cylinders that somebody has "butcher cut" the fins at a 45° angle in an attempt to fit the dual port muffler onto, but thats not what I'm interested in.

Thanks for the reply.

Piston.
 
Back
Top