• If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Want to Buy 262/261/257/254

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

262freak

ArboristSite Operative
Joined
Aug 13, 2020
Messages
171
Reaction score
24
Location
nc
Looking for all of the above builder saws or parts might be interested in runners and nice parts cylinders etc.
 
I have a 254 that I went through last winter. I might be interested in parting with it. 20201231_171218.jpg
20201231_171116.jpg
20200621_163553.jpg20200621_163528.jpg20200621_163606.jpg
It was my first full rebuild. I split the case and put in new bearings, ring, piston pin bearing, crank seals, rebuilt the carb, replaced the tank with new, installed a used brake housing/clutch cover and installed a new clutch support bearing. I made a front exit muffler so the brake flag doesn't get melted again.

She's a ripper! I've run about 4 tanks through it and it runs great. I could stand to thin my herd though. PM me if interested and maybe we can work something out.

Lee
 
I’ve got a couple options,
- One is 80% parts in a box to build a 262.

- one complete 262 that needs a brake flag attached and to go through with carb kit and such to get running.

I can post pics if you’re interested
 
I’ve got a couple options,
- One is 80% parts in a box to build a 262.

- one complete 262 that needs a brake flag attached and to go through with carb kit and such to get running.

I can post pics if you’re interested
Yes I'm interested either one a none decomp cylinder? Send pics and a price tag.
 
I’ve got a salty 262 non decomp ported by Doc as well as a 254 runner, it’s ugly but runs darn good. Have a 254 carcass as well as a 257.
 
4ca1a7707cf47204a87540d2948da1a4.jpg

15d0098962377942e5ff26030f06cdd2.jpg

68573172a168fad1dc2b9576f94a30fb.jpg

392c1d080cd0c92356b5330f46ff1e3e.jpg


Here’s some pics of that 262xp. I have the clutch drum/ clutch/ sprocket in a zip lock bag. It needs some work, and I’m short on time so I can send it if you want it. PM for details.

I’ll post up pics of the saw in a box on Monday- I left the box at work.
 
Back
Top