3400 Counter Vibe High, Low and Idle Adjustments

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Mad3400

ArboristSite Operative
Joined
Jul 30, 2021
Messages
134
Reaction score
197
Location
CA
Hello, New to the Forum
I picked up a Poulan 3400 Counter Vibe, not sure the year, for $50 Bucks and went through Everything!
(I have another one but the cylinder and piston are shot with only 30 psi)

The Saw will start and when it does it's got good power, but if I take my finger of the throttle it dies and when it warms up after 2 minutes, it boggs and stalls at Full throttle and then it takes a bunch of pulls to get started and ends up flooding, I suspect the High, Low and Idle are off.

I messed with the High and Low, and Throttle adjustments, but now I want to start fresh and reset them all.

How many Turns out should the High, Low and Idle at, when I resting the Carb?

I really need this saw going soon, any help will be greatly appreciated.

Thanks,

Mad3400
 

Latest posts

Back
Top