...adapting a 362 wrap handle kit for a 261 ("How To" with pictures) Stihl MS 261 (R) C-M

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Hatchville Homesteader

ArboristSite Member
Joined
Sep 19, 2020
Messages
54
Reaction score
76
Location
Falmouth, MA
Thought I would post some pics of this wrap handle conversion on a 261. I got a couple DM's asking about it so here it is. I wrap all my chainsaw handles with high quality cycling bar tape for improved comfort and grip.



...and for how it was done

IMG_0074.JPEG
This is where I cut the 362 wrap handle on the clutch cover side so the anti-vibe would line up.


IMG_0075.JPEG
I cut the 362 wrap handle on the flywheel side just before the handle started to curve.


IMG_0076.JPEG
I purchased a second 261 half wrap handle from ebay and cut it just before the vertical bend.


IMG_0077.JPEG
I then shaved down the plastic 261 half wrap handle so it would insert into the metal 362 full wrap handle.


IMG_0078.JPEG
Getting everything to fit nicely.


IMG_0079.JPEG
Relocating clutch cover side mounting holes.


IMG_0080.JPEG
New hardware test fit. Using "Chicago" binding screws to replace the missing fastner. New mounting holes do not interfere with standard assembly disassembly.


IMG_0082.JPEG
Using binding screws to hold the 261 half wrap to the 362 full wrap.


IMG_0083.JPEG
Mounting the full wrap handle.


IMG_0084.JPEG
Using the provided 362 anti-vibe from the kit lines up perfectly.
 
Back
Top