• If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Sold Barely used Husqvarna 372xp, 28" bar, 4 chains, documents

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

CNYCountry

ArboristSite Operative
Joined
Jun 7, 2005
Messages
251
Reaction score
49
Location
Remsen, NY
Bought 6/1/2021, needed a bigger saw than I had to clear some land. Selling because my new MS661 finally came in. Warranty good until 6/1/2023. All receipts, documents, accessories, bar and 4 full chisel chains included.

I've only run 4 or 5 tanks through it, always used VP SEF 50:1 (https://vpracingfuels.com/product/501-premixed-small-engine-fuel/) since it came dry from the dealer. Only used to fell and buck stuff that my 60cc saw wasn't really big enough for.

Bar is .058" gauge, 28", set up for 3/8" pitch, 93 drivers. 4 chains include one new Stihl RS that's never been out of the box, the used Husky chain that came with it and two used Stihl RS chains. The Husky and one Stihl chain are probably 80%+ life left, the other is maybe 50% as I hit trash in a tree and had to grind past the damage.

All 3 used chains were just done on my grinder with a high quality CBN wheel, so all angles are correct, all cutters equal and not burned. Rakers set to .025 by gauge.

I have a total of $1,116.52 into this with tax between the original receipt and the 3 Stihl RS chains (receipt shows 2 of them, missing receipt for the third but same price). You are welcome to inspect and try it, I think the condition of bar/sprocket, receipts and so on tell the story, this saw is barely used. Welcome to test compression, pull muffler, etc.

Strongly prefer local, in person cash sale. I'm in central NY state, north of Utica.

Feel free to tell me I'm nuts. I would like to see $800, I think realistically the bar and 4 chains included along with receipts, warranty etc make it a decent value at that price.

Here it is in 32" sugar maple, was warmed up before video:
 

Attachments

  • 01 IMG_0550.JPG
    01 IMG_0550.JPG
    2 MB · Views: 31
  • 03 IMG_0558.JPG
    03 IMG_0558.JPG
    1.4 MB · Views: 40
  • 04 Saw Receipt.png
    04 Saw Receipt.png
    4.5 MB · Views: 39
  • 05 Chain Receipt.png
    05 Chain Receipt.png
    761 KB · Views: 35
  • 09 IMG_0554.JPG
    09 IMG_0554.JPG
    2 MB · Views: 32
  • 11 IMG_0557.JPG
    11 IMG_0557.JPG
    1.1 MB · Views: 33
  • 12 IMG_0559.JPG
    12 IMG_0559.JPG
    1.3 MB · Views: 34
  • 13 IMG_0560.JPG
    13 IMG_0560.JPG
    711.3 KB · Views: 31
  • 15 IMG_0562.JPG
    15 IMG_0562.JPG
    798.9 KB · Views: 23
  • 16 IMG_0563.JPG
    16 IMG_0563.JPG
    727.4 KB · Views: 30
Sold locally, thanks everyone for looking! If it's helpful for anyone pricing something like this, it went for $750 which I thought was very fair.
 
Back
Top