BOSS 7 ton electric splitter

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

flh69

ArboristSite Lurker
AS Supporting Member
Joined
May 4, 2019
Messages
45
Reaction score
19
Location
Maryland
The ram on my Boss 7 ton splitter broke & when it did it bent the hyd. shaft. I did get the shaft straightened but the return spring put two raised spots on the cylinder that the hyd. shaft goes thru to pull the ram. I was wondering if the piston will let fluid go past it and lose pressure. The one picture shows the area of the hump beside the piston & the other picture shows the raised area. There is another raised area on the tube on the other side of this area.
IMG-0139.jpgIMG-0141.jpg
 

Latest posts

Back
Top