• If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Sold Clean Poulan 4400

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

miller755

ArboristSite Operative
Joined
Jan 29, 2020
Messages
142
Reaction score
148
Location
46350
Poulan 4400 I bought locally recently. It's in really nice shape. I cleaned it up. The saw will idle indefinitely, in all positions, seemed to run good and cut good with the clapped out bar and chain that were on it. It just started on the first pull after sitting since last night. This thing is healthy with 175 psi, which Is the highest I have seen on this gauge, most saws fall in the 150-170 range on this gauge. I am putting it up for trade because it is kind of too nice for me. Two minor issues, the spur is in bad shape, and the fuel line is not tight to the hole in the tank, so there can be a small amount of leakage if you turn the saw upside down. $350 plus shipping.
 
PicsIMG_20210422_225126675_HDR.jpgIMG_20210422_225155049_HDR.jpgIMG_20210422_225228186_HDR.jpgIMG_20210422_223229596.jpgIMG_20210422_223552422.jpgIMG_20210422_224053636.jpg
 

Attachments

  • IMG_20210422_225110833_HDR.jpg
    IMG_20210422_225110833_HDR.jpg
    3.2 MB · Views: 27
  • IMG_20210422_231055816.jpg
    IMG_20210422_231055816.jpg
    2 MB · Views: 24
  • IMG_20210422_231547252.jpg
    IMG_20210422_231547252.jpg
    1.7 MB · Views: 22
  • IMG_20210422_231559406.jpg
    IMG_20210422_231559406.jpg
    2.1 MB · Views: 24
I have the Poulan 4900 and I cannot find parts for it anywhere. Where is a good place to get parts for these old saws. I need a new air filter but there is none available.


Sent from my iPhone using Tapatalk
 
What sort of things are you looking for in trade?
Chainsaws...seriously though, I'm dreaming, but something ported would move it. Otherwise, let me know what you are willing to trade, I guess I would do cash on either end of the deal to make it fair.
 
Poulan 4400 I bought locally recently. It's in really nice shape. I cleaned it up. The saw will idle indefinitely, in all positions, seemed to run good and cut good with the clapped out bar and chain that were on it. It just started on the first pull after sitting since last night. This thing is healthy with 175 psi, which Is the highest I have seen on this gauge, most saws fall in the 150-170 range on this gauge. I am putting it up for trade because it is kind of too nice for me. Two minor issues, the spur is in bad shape, and the fuel line is not tight to the hole in the tank, so there can be a small amount of leakage if you turn the saw upside down.
May I ask what fuel ratio do you use with this 4400?
 
I have the Poulan 4900 and I cannot find parts for it anywhere. Where is a good place to get parts for these old saws. I need a new air filter but there is none available.


Sent from my iPhone using Tapatalk
Lookup air filter 4400 here for a simple fix. I going to do it to mine.
 
Back
Top