Kommandokenny
ArboristSite Lurker
I picked up two Husky 550 ‘s at the dump .
Guy at the dump is not allowed to scoop them.
He said some cottager in a land rover left them, saying both were running last year, but neither will start now.
So I gassed the better looking one up, it’s a 2015 with the A 12 carb.
Not even a burp, nothing .
It has spark.
I put a bit of gas in through the spark plug hole ,,nothing .
I noticed it was easy to pull and had the same resistance with decompression valve in or out .
I put the coompression tester on it and got it up to 3psi.
The other 550 had 50 psi .
So I had success with my 61 and a Chinese jug and piston so I pulled off the cylinder expecting a hole in the piston or a smashed in, wore out, ring and cylinder wall .
Nope the piston ring cylinder and piston all looked great [to Myuntrained eye].
Before I order a Chinese piston and jug ,,,,,,Am I missing something.
Sorry for the long winded explanation
Guy at the dump is not allowed to scoop them.
He said some cottager in a land rover left them, saying both were running last year, but neither will start now.
So I gassed the better looking one up, it’s a 2015 with the A 12 carb.
Not even a burp, nothing .
It has spark.
I put a bit of gas in through the spark plug hole ,,nothing .
I noticed it was easy to pull and had the same resistance with decompression valve in or out .
I put the coompression tester on it and got it up to 3psi.
The other 550 had 50 psi .
So I had success with my 61 and a Chinese jug and piston so I pulled off the cylinder expecting a hole in the piston or a smashed in, wore out, ring and cylinder wall .
Nope the piston ring cylinder and piston all looked great [to Myuntrained eye].
Before I order a Chinese piston and jug ,,,,,,Am I missing something.
Sorry for the long winded explanation