Want to Sell Dolmar Parts (Updated 27/07/23)

[oldpartsinasia-joe]

Hey people, happy to find a site that lots of buzz on chainsaws.
If you have really old Dolmar Chainsaws and want to search for that elusive part, PM me the 9 digit Dolmar Part number and I will check if we have such DOLMAR part numbers in our stock. The old parts are not in US, but in Singapore. Old stock left over from 80s to 00s from Dolmar Distributor (before Makita era). Will list part numbers that are in stock.







(Available Dolmar Parts)
957130309 Modification Set Cylinder (S1 1/92) for Plastic hood (Dolmar 309 power Cut)
965518111 Gasket (S1 1/92)
133131051 Intermediate Flange (S1 1/92)
133131041 Gasket (S1 1/92)
038245031 PUMP DRIVE <Feb 2023>
038155060 SPACER 30MM <Feb 2023>
908204555 SCREW M4X55 <Feb 2023>
123112100 STARTER ASSY DOLMAR123-143, 309 <Feb 2023>
123114011 METAL FUEL TANK DPC7000, DPC9500<Feb 2023>
027213050 BRAKE BAND CPL (DOLMAR 109,111,115) <Mar 2023>
965604180 SPRING PS9000 PS9010 <Mar 2023>

Ignition Coils
=========
024143020 IGNITION COIL PS9000 <Mar 2023>
024143051 IGNITION COIL PS9010 <Mar 2023>
957604260 PLUG CAP CPL PS9000 PS9010 <Mar 2023>

Guide bars (Sach Dolmar NOS) <Mar 2023>
=============================
For DOLMAR 123, 133, 133S, 143, PS-9000, PS-9010
412 310 400 SOLID NOSE BAR 50 CM, 0.058"
412 312 400 SOLID NOSE BAR 60 CM, 0.058"
412 315 400 SOLID NOSE BAR 74 CM, 0.058"

For DOLMAR 112, 114, 117, 120, 120s, 116si,120si
DOLMAR 109, 111, 115i, PS-43, PS-52
DOLMAR PS-4605, PS-5105
DOLMAR PS-6000i, PS-6800i
411 907 650 SPROCKET NOSE BAR 38 CM, 3/8" .058"
411 909 650 SPROCKET NOSE BAR 45 CM, 3/8" .058"
411 910 650 SPROCKET NOSE BAR 53 CM, 3/8" .058"
415 038 451 SOLID NOSE BAR 38 CM (S/S 411 907 400)
415 045 451 SOLID NOSE BAR 45 CM (S/S 411 909 400)
415 053 451 SOLID NOSE BAR 53 CM (S/S 411 910 400)
415 060 451 SOLID NOSE BAR 60 CM (S/S 411 912 400)

For DOLMAR 153, 166
410 710 430 SOLID NOSE BAR 53 CM, .404"/.063"
410 712 430 SOLID NOSE BAR 63 CM, .404"/.063" PS-9000, PS-9010
416 617 430 SOLID NOSE BAR 84 CM, .404"/.063"
410 718 440 SOLID NOSE BAR 94 CM, .404"/.063"
416 617 430 SOLID NOSE BAR 84 CM, .404"/.063" (DOLMAR 166 ONLY)

For PS-340, PS-341, PS-400, PS-401
PS-350, PS-350USA PS-350C PS350SC, PS-351USA)
412 030 661 SPROCKET NOSE BAR 30 CM, 3/8" .050"
412 035 661 SPROCKET NOSE BAR 35 CM, 3/8" .050"
412 040 661 SPROCKET NOSE BAR 40 CM, 3/8" .050"

For PS-3400, PS-3400TH
PS-33, PS-330, PS-340, PS-341, PS-342, PS-344
PS-39, PS-390, PS-400, PS-401
412 025 661 SPROCKET NOSE BAR 25 CM, 3/8" .050"
412 030 661 SPROCKET NOSE BAR 30 CM, 3/8" .050"
412 035 661 SPROCKET NOSE BAR 35 CM, 3/8" .050"

FOR DOLMAR PS-9000 PS-9010
412 312 400 SOLID NOSE BAR 60 CM

For DOLMAR PS-6100, PS-6100H
415 045 451 SOLID NOSE BAR 45 CM, 3/8", .058"
415 060 451 SOLID NOSE BAR 60 CM, 3/8", .058"

DOLMAR PS-7310, PS-7910
PS-630, PZ-6400, PS-7300, PS-7900
415 050 655 SPROCKET NOSE BAR 50 CM, 3/8", .058"
415 050 455 SOLID NOSE BAR 50 CM, 3/8", .058"
415 060 455 SOLID NOSE BAR 60 CM, 3/8", .058"
415 070 455 SOLID NOSE BAR 70 CM, 3/8", .058"


Carburetors
=========

<Apr 2023>
957 150 010 SET CARB SPARES (For Dolmar 133, 143 Tillotson HS 203 / 232 Caburetor)
957 150 100 DIAPHRAGM SET (For Dolmar 133, 143 Tillotson HS 203 / 232 Caburetor)
020 150 180 SCREEN (For Dolmar 133, 143 Tillotson HS 203 / 232 Caburetor)
<May 2023>
957 151 700 CARBURETOR Walbro WT-174 ( For Dolmar 100, 100S, 102, PS-33, PS-39, PS-330, PS-340, PS-341, PS-380, PS-390, PS-400, PS-401, PS-410, PS-411)

Oil Pumps
========
957 245 360 REPAIR SET FOR OIL PUMP (DSC9010)<Apr 2023>

Air Filters <APR 2023>
========
001 173 020 INNER FILTER CPL (DOLMAR 309)
020 173 200/202 AIR FITLER NYLON
020 173 300 AIR FITLER ROBKOFLOK
028 173 140 AIR FILTER ROBKOFLOK
038 173 011 AIR FILTER NYLON
113 173 030 AIR FITLER (DOLMAR CA )
121 173 150 /151 AIR FILTER CPL ROBKOFLOK (DOLMAR 120)

Powercuts Dolmar 309, 343 Parts <MAY 2023>
====================
965 300 440 VBELT L=867MM
398 228 013 SHAFT DIAM 20MM
392 228 340 PRESSURE DISC 20MM
392 228 350 PRESSURE DISC 20MM
392 341 070 HEX SCREW, LEFT HAND
392 228 040 ADAPTOR 20MM/25.4 MM

Crankshafts
========
031 120 201 CRANKSHAFT CPL ( DOLMAR 143 that has contact igniton coil) <JUL2023>

Part numbers will be updated from time to time.
Interested, please PM me
-oldpartsinasia Joe

 

[Jay Hansen]

Good seller here. Takes a little while to get the order but I was extremely happy with the parts and Joe is great to deal with.

 

[av8or3]

PM’d

 

[oldpartsinasia-joe]

Since you are here... why don't you check your Dolmar Chainsaw model and IPL and see what you need?
Drop me a DM!

-oldpartsinasia Joe

 

[HandLogger]

Hi Joe ~ Do you happen to have any parts for newer Dolmar/Makita saws?

 

[oldpartsinasia-joe]

Hi HandLogger, not the latest Dolmar/Makita ones. Send me a few part numbers and I will check. Sometimes the part numbers could be common in both old and new Dolmar Makitas.

-oldpartsinasia Joe

 

[Dadsaws]

Im looking for (2) 123 232 011 Bar studs for a 143

 

[oldpartsinasia-joe]

Hi Dadsaws, we do have in limited qty. Check out my PM.

-oldpartsinasia Joe

 

[oldpartsinasia-joe]

Merry Christmas in advance to all Dolmar saws owners/user/collectors!


I have more than what you see in this thread but need time to update.
Drop me a PM if you have any questions!

-oldpartsinasia Joe

 

[Colber Thornton]

411 910 650 SPROCKET NOSE BAR 53 CM, 3/8" .058"

HI, do you have one of these in stock .

Best Regards

 

[oldpartsinasia-joe]

Hi Colber,

I will check back on Monday.
On paper I have 3pcs.

-oldpartsinasia Joe

 

[Colber Thornton]

HI , Thanks ,

C Thornton.

 

[oldpartsinasia-joe]

4pcs left. See attached photo.

-oldpartsinasia Joe

 

[av8or3]

Nice looking bars Joe!

 

[Colber Thornton]

HI , my saw is a Makita branded Dolmar- DCS6000i, which is the same as a Dolmar PS6000i, it came with a 20 inch bar- its a 1993 saw, so this bar would fit , as the spec is identical. How much would this bar cost , postage paid sent to the UK ?

Best Regards

 

[Colber Thornton]

Hi, Re shipping, my brother is in the USA , Conneticut , so it could be sent to him if thats more cost effective- he would bring it over to the uk on his next visit.

 

[oldpartsinasia-joe]

Hi, Re shipping, my brother is in the USA , Conneticut , so it could be sent to him if thats more cost effective- he would bring it over to the uk on his next visit.

Hi Colber, it will be more cost effective if you are getting 2 or more.
The best if you are heading to Singapore for a holiday and meet up!

Shipping alone via FedEx to Connecticut 06679: USD 80
Part Cost (1 Guide Bar): USD 25

Let me know if you would like to proceed further for USD 115 for one 20" Guidebar via FedEx (typo, should be 105 USD)
or spend a few more grands and come to Singapore!

-oldpartsinasia Joe

 

[Colber Thornton]

HI , Thanks for sending out this info - on balance the saw is 30 years old and probably worth only about $ 50 ! , so its not really economical to get the bar sent over. Until a few years ago I did use to go to Singapore on business to the A Star institute and also the NUS. If I know of anyone going to Singapore in the next few months I'll be in touch ..

Best Regards
C Thornton.

 

[oldpartsinasia-joe]

Hi C, I understand. If you have a better FedEx or DHL rate to your location, it's 60x8x3cm, 1.5kg.

Someone in US should just come over to Singapore/Malaysia and look at the remaining Dolmar stocks. Then do a one time seashipment.

In my part of the world, lesser demand for powerful chainsaws. Protected rainforest, lots of oil palm plantation, and cheaper Chinese Saws, world peace...

Hmm.. I did my bachelor in NTU!

-oldpartsinasia Joe

 

[redpowerd]

dolmar 965 525 031.... carb flange to cylinder gasket. The 032 may be a close match. May try my hand at making one. Ive got 5 of these saws. Thanks.