Fundraiser for Jeremy Miller........Adirondackstihl

Help Support ArboristSite:

troylee

troylee

ArboristSite Guru
Joined
Dec 4, 2013
Messages
797
Location
Cooksville, Illinois
Hope this is OK to post here. Just trying to help a family out.

Lots of GREAT prizes in the raffle, and more coming in everyday.

https://www.gofundme.com/adirondackstihl-surgery-fund

1 ticket per 10 dollar donation


Leave contact info in the comments section on gofundme donation form (so you get your raffle ticket) or go to the other site to follow along.

UPDATED LIST:

1) Vintage McCulloch sharpening jig and a Homelite410 filing vise from @Mastermind

2) Mastermind ported Husqvarna 346 XP OE from @troylee

3) Winner gets a set of their crankcases powdered by Glock37 from @glock37

4) Makita XPH12 18V LXT Brushless hammer drill. Will include one 4.0 Ah Battery and charger. from @166

5) Port Job from @huskihl

6) New 20" Husqvarna Large Mount Bar and Square Ground chain from @dustinwilt68

7) Vintage Craftsman badged Poulan from the Electrolux era Model 358.356070 from @Sleeper

8) BRAND NEW Stihl 25" 84DL LIGHT bar from @GCJenks204

9) Six Pack of 2.5 Gallon Red Armor Mix oil with shipping to the winner from @Dub11

10) Vintage John Deere saw from @Deets066

11) Custom Tuned Pipe from @spencerpaving. :eek:

12) Woods Port from @tree monkey

13) Brand new Husqvarna 372 Full Wrap handle from @TreeLife

14) N.O.S. Husqvarna 262 XP top end from @lwhaples

15) Mastermind ported Dolmar PS-6100 from @Adirondackstihl

16) Chainsaw Repair Tool Set from @Definitive Dave

17) JMS Ported 064/066 from @miller Mod Saws

18) Timberline Sharpener from @ny15

19) A case of 12 quarts of AMSOIL Saber synthetic mix from @Wood Chopper

20) A VERY NICE Stihl 028 Super from @SOS Ridgerider

21) Brand New Performance Tools T-Handle sets in SAE, Metric, and Torx from @USMC615

22) 1 pair of work gloves, 1 pair of Oregon Braces, 1 chainsaw filing set, and 1 single person first aid kit from @ajschainsaws

23) Winner's choice of a CCC Racing 346xp NE 44.3mm pop-up performance OR race flat top piston made for us by Wiseco. Both have a 1mm chrome faced Japanese steel ring centered on the intake with patented go-fast technology and patent pending never-lose additives :) This offer not open to anyone who shouts "Team Stihl" at a wedding or baptism. from @Definitive Dave

24) MINTY Husqvarna 257 from @Stump Shot

25) NEW Sugi Hara Lightweight 32" 3/8 .063 Gauge in 3003 Stihl mount (D025) from @Roadfxr

26) NEW 20" Total Super Bar (TsuMura) 3/8 .050 Gauge in D009 mount from @Dolmar Junkie

27) Box of 044/440 parts, includes 12mm Stihl cylinder, It has a scratch that can be felt, but the saw ran great and had good power, aftermarket piston, oem piston wrist pin, oem bearing (I think) c clips, AV bushings,some rubber pieces, nice after market 440 tank, oem bearing spacer, oem handle, good running Hong Kong Zama carb, muffler base, oem badges, oem brake flag, ans a set of Glock37 powder coated spikes with hardware and chain catcher from @Backtroller

28) Gamn carbide sharpener with two burrs and literature from @Tpagel

29) A dozen BEAUTIFUL hand tied Trout Flies from @Adirondackstihl

30) Makita 47 Pc. Ratchet and Bit Set from @166

31) Hand forged set of draw knives, one curved and one straight, made by none other than the legendary Scotty Overkill himself! from @Scotty Overkill

32) Crank tool kit from @Mattyo

33) Kit saw of the winners choice fron HL Supply from @Gentleman
 
troylee

troylee

ArboristSite Guru
Joined
Dec 4, 2013
Messages
797
Location
Cooksville, Illinois
IMG_5173.JPG
List of what went into the saw:

Cases milled to set squish to 0.020" by Murray Underhill
Cases, clutch cover, muffler, muffler support bracket, and telling spike powdercoated by Glock37
Muffler built by Homelite410
Modded 199 carb by TreeMonkey
Cylinder cleaned up and ported by Mastermind
New Meteor piston kit from Definitive Dave
New 16" .325 .058 Total Super bar from Spike60
Loop of 25 RS chain from Stephens Repair Shop
New main bearings, gaskets and seals, decals, 357/359 filter holder, air filter, choke lever, stop lever, grounding strap, fuel line, fuel filter, tank vent.
New recoil and sticker from Leroy Farm & Lawn
Thank you to EVERYONE involved. It was a long TWO year project. It turned out better than any of us expected.
 
GCJenks204

GCJenks204

ArboristSite Operative
Joined
Jul 6, 2014
Messages
493
A few more prizes added to the list. Conservative estimate is around $9000 worth of prizes...

UPDATED LIST:

1) Vintage McCulloch Sharpening jig and a Homelite410 filing vise from @Mastermind

2) Mastermind ported Husqvarna 346 XP OE from @troylee

3) Winner gets a set of their crankcases powdered by Glock37 from @glock37

4) Makita XPH12 18V LXT Brushless hammer drill. Will include one 4.0 Ah Battery and charger. from @166

5) Port Job from @huskihl

6) New 20" Husqvarna Large Mount Bar and Square Ground chain from @dustinwilt68

7) Vintage Craftsman badged Poulan from the Electrolux era Model 358.356070 from @Sleeper

8) BRAND NEW Stihl 25" 84DL LIGHT bar from @GCJenks204

9) Six Pack of 2.5 Gallon Red Armor Mix oil with shipping to the winner from @Dub11

10) Vintage John Deere saw from @Deets066

11) Custom Tuned Pipe from @spencerpaving. :eek:

12) Woods Port from @tree monkey

13) Brand new Husqvarna 372 Full Wrap handle from @TreeLife AND a set of new oem west coast spikes from @Czed

14) N.O.S. Husqvarna 262 XP top end from @lwhaples

15) Mastermind ported Dolmar PS-6100 from @Adirondackstihl

16) Chainsaw Repair Tool Set from @Definitive Dave

17) JMS Ported 064/066 from @miller Mod Saws

18) Timberline Sharpener from @ny15

19) A case of 12 quarts of AMSOIL Saber synthetic mix from @Wood Chopper

20) A VERY NICE Stihl 028 Super from @SOS Ridgerider

21) Brand New Performance Tools T-Handle sets in SAE, Metric, and Torx from @USMC615

22) 1 pair of work gloves, 1 pair of Oregon Braces, 1 chainsaw filing set, and 1 single person first aid kit from @ajschainsaws

23) Winner's choice of a CCC Racing 346xp NE 44.3mm pop-up performance OR race flat top piston made for us by Wiseco. Both have a 1mm chrome faced Japanese steel ring centered on the intake with patented go-fast technology and patent pending never-lose additives :) This offer not open to anyone who shouts "Team Stihl" at a wedding or baptism. from @Definitive Dave

24) MINTY Husqvarna 257 from @Stump Shot

25) NEW Sugi Hara Lightweight 32" 3/8 .063 Gauge in 3003 Stihl mount (D025) from @Roadfxr

26) NEW 20" Total Super Bar (TsuMura) 3/8 .050 Gauge in D009 mount from @Dolmar Junkie

27) Box of 044/440 parts, includes 12mm Stihl cylinder, It has a scratch that can be felt, but the saw ran great and had good power, aftermarket piston, oem piston wrist pin, oem bearing (I think) c clips, AV bushings,some rubber pieces, nice after market 440 tank, oem bearing spacer, oem handle, good running Hong Kong Zama carb, muffler base, oem badges, oem brake flag, ans a set of Glock37 powder coated spikes with hardware and chain catcher from @Backtroller

28) Gamn carbide sharpener with two burrs and literature from @Tpagel

29) A dozen BEAUTIFUL hand tied Trout Flies from @Adirondackstihl

30) Makita 47 Pc. Ratchet and Bit Set from @166

31) Hand forged set of draw knives, one curved and one straight, made by none other than the legendary Scotty Overkill himself! from @Scotty Overkill

32) Crank tool kit from @Mattyo

33) Kit saw of the winners choice from Hl Supply from @Gentleman

34) A case (24) of Tanaka Perfect Mix 6.4oz bottles from @PissRev

35) A brand new 18" .325 .063 74DL Bar and Chain setups in Stihl mount. Bar is the same as an Oregon Prolite (1 of 2) from @166

36) A brand new 18" .325 .063 74DL Bar and Chain setups in Stihl mount. Bar is the same as an Oregon Prolite (2 of 2) from @166
 
troylee

troylee

ArboristSite Guru
Joined
Dec 4, 2013
Messages
797
Location
Cooksville, Illinois
UPDATED LIST:

1) Vintage McCulloch Sharpening jig and a Homelite410 filing vise from @Mastermind

2) Mastermind ported Husqvarna 346 XP OE from @troylee

3) Winner gets a set of their crankcases powdered by Glock37 from @glock37

4) Makita XPH12 18V LXT Brushless hammer drill. Will include one 4.0 Ah Battery and charger. from @166

5) Port Job from @huskihl

6) New 20" Husqvarna Large Mount Bar and Square Ground chain from @dustinwilt68

7) Vintage Craftsman badged Poulan from the Electrolux era Model 358.356070 from @Sleeper

8) BRAND NEW Stihl 25" 84DL LIGHT bar from @GCJenks204

9) Six Pack of 2.5 Gallon Red Armor Mix oil with shipping to the winner from @Dub11

10) Vintage John Deere saw from @Deets066

11) Custom Tuned Pipe from @spencerpaving. :eek:

12) Woods Port from @tree monkey

13) Brand new Husqvarna 372 Full Wrap handle from @TreeLife AND a set of new oem west coast spikes from @Czed

14) N.O.S. Husqvarna 262 XP top end from @lwhaples

15) Mastermind ported Dolmar PS-6100 from @Adirondackstihl

16) Chainsaw Repair Tool Set from @Definitive Dave

17) JMS Ported 064/066 from @miller Mod Saws

18) Timberline Sharpener from @ny15

19) A case of 12 quarts of AMSOIL Saber synthetic mix from @Wood Chopper

20) A VERY NICE Stihl 028 Super from @SOS Ridgerider

21) Brand New Performance Tools T-Handle sets in SAE, Metric, and Torx from @USMC615

22) 1 pair of work gloves, 1 pair of Oregon Braces, 1 chainsaw filing set, and 1 single person first aid kit from @ajschainsaws

23) Winner's choice of a CCC Racing 346xp NE 44.3mm pop-up performance OR race flat top piston made for us by Wiseco. Both have a 1mm chrome faced Japanese steel ring centered on the intake with patented go-fast technology and patent pending never-lose additives :) This offer not open to anyone who shouts "Team Stihl" at a wedding or baptism. from @Definitive Dave

24) MINTY Husqvarna 257 from @Stump Shot

25) NEW Sugi Hara Lightweight 32" 3/8 .063 Gauge in 3003 Stihl mount (D025) from @Roadfxr

26) NEW 20" Total Super Bar (TsuMura) 3/8 .050 Gauge in D009 mount from @Dolmar Junkie

27) Box of 044/440 parts, includes 12mm Stihl cylinder, It has a scratch that can be felt, but the saw ran great and had good power, aftermarket piston, oem piston wrist pin, oem bearing (I think) c clips, AV bushings,some rubber pieces, nice after market 440 tank, oem bearing spacer, oem handle, good running Hong Kong Zama carb, muffler base, oem badges, oem brake flag, ans a set of Glock37 powder coated spikes with hardware and chain catcher from @Backtroller

28) Gamn carbide sharpener with two burrs and literature from @Tpagel

29) A dozen BEAUTIFUL hand tied Trout Flies from @Adirondackstihl

30) Makita 47 Pc. Ratchet and Bit Set from @166

31) Hand forged set of draw knives, one curved and one straight, made by none other than the legendary Scotty Overkill himself! from @Scotty Overkill

32) Crank tool kit from @Mattyo

33) Kit saw of the winners choice from Hl Supply from @Gentleman

34) A case (24) of Tanaka Perfect Mix 6.4oz bottles from @PissRev

35) A brand new 18" .325 .063 74DL Bar and Chain setups in Stihl mount. Bar is the same as an Oregon Prolite (1 of 2) from @166

36) A brand new 18" .325 .063 74DL Bar and Chain setups in Stihl mount. Bar is the same as an Oregon Prolite (2 of 2) from @166

37) A Regulator (great for finding leaks) from @psuiewalsh

38) A made in USA Oregon 28" D009 mount in 3/8 .050 includes a used Stihl chain that has been converted to square ground from @psuiewalsh

39) A SWEET vintage Husqvarna labeled Windsor bar 16" 3/8 .058 60 DL from @Stump Shot

40) A BEAUTIFUL Homelite410 custom Engine Turned 3/8 .050 Gauge 84 DL Stihl bar from @Time's Standing Stihl:eek:
 

Latest posts

Top