• If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Want to Buy Heated handle chainsaw

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Brushwacker

Addicted to ArboristSite
AS Supporting Member.
Joined
Jun 25, 2006
Messages
4,102
Reaction score
1,853
Location
Medaryville, IN USA
Well, would like to find somthing that preferably doesn't need worked on other then bar, chain and sprocket for a few hundred, less or more depending on its stature. Any cc. I can pay cash through pay pal, or maybe do some trading. Have a Makita 6410 , low compression, will not start and an Stihl ms280 with great compression, looks good, works. Also parts, bars, and chains, this and that , some new and used.
 
I have a dolmar 5105 with heat that's ready to run. I'd need 400 plus shipping for it.
May consider meeting half way and doing some trading with the 6410.
Shoot me a PM if you're interested.
 
Sounds interesting, you in or near Grand Rapids, MI. ? I am something like 50 miles from New Buffalo, been to Grand Rapids 30+ years ago, thinking it was, 50 or 75 miles from New Buffalo.
I haven't researched prices on the 6410 lately, last I remember they seemed to sell pretty fast on the internet. Was thinking it would sell near $250, a bit more or less.
Piston was scuffed a bit when i bought it 2 or 3 years ago off ebay but it ran decent and had about 160#s of compression then . I expect 6 to 10 tanks of fuel I run through it. Last winter after a new carb kit , ran better then ever and I run it empty on fuel, went to restart and felt like very little compression and no fire. Haven't done any serious troub.le shooting on it since.
I will aim to get some pics tonight ,
John
 
Sounds interesting, you in or near Grand Rapids, MI. ? I am something like 50 miles from New Buffalo, been to Grand Rapids 30+ years ago, thinking it was, 50 or 75 miles from New Buffalo.
I haven't researched prices on the 6410 lately, last I remember they seemed to sell pretty fast on the internet. Was thinking it would sell near $250, a bit more or less.
Piston was scuffed a bit when i bought it 2 or 3 years ago off ebay but it ran decent and had about 160#s of compression then . I expect 6 to 10 tanks of fuel I run through it. Last winter after a new carb kit , ran better then ever and I run it empty on fuel, went to restart and felt like very little compression and no fire. Haven't done any serious troub.le shooting on it since.
I will aim to get some pics tonight ,
John
Little east of Grand Rapids. Been to new buffalo many times, I delivered all the steel(interior and exterior), insulation, drywall, and mud for the expansion project at the casino 8yrs ago, I was there nearly every day for about 8 months :oops:.
Sounds like you need more for the 6410 than I'm looking to give, but I'm sure someone would pay that. Being realistic it would probably get put on a shelf until someone asked me for one.
The 5105 is in pretty good condition. I can get pictures if you'd like.
 

Latest posts

Back
Top