Husky 350 guru advice please

[OnthewrongPlanet]

Gday from Oz.
Reliable std Husky 350 with std laminated .325 .050 72 bar roller tip failed. Live in humid tropics so most work is very dirty, white-anted timber, lopping Mango trees sticky wood, after cyclones etc.
.325 050 bar/chains semi chisel not very popular here to replace so from USA it is. Would shorter bar like 15 or 16" with 3/8 and/or .058 chain help clear the sappy wood better from bar and the 350 drive it ok ? Open to advice before having to buy 50cc saw. Im bit lost to how each size should cut and best chain for role in a 45cc.
Any advice much appreciated. Cheers.

 

[Jasonrkba]

Maybe use thinner bar oil. There is a mod you can do to increase oil flow also.

 

[OnthewrongPlanet]

I got over a decade of abuse out of it so thats not a worry. Having to replace the guide bar has given opportunity to change the specs. if there is something more suitable compared to getting a Tsumura in 16" in .325 .050 from HL in USA there. Maybe Im over thinking and should just run same