Want to Sell Husky 372XP, 268, 55, Stihl MS361, MS360, 028, 028 Super, 260 Pro, MS210, MS180, Poulan Super 68 Bow

[Michael G]

Got a bunch of saws. Shipping not included. PayPal. Shipping from metro Atlanta area Georgia. Saws are POWERHEAD ONLY unless you really want the bar and chain, we can work it out.

Trades for an iPhone 7 Plus, a zero turn, landscaping stuff (looking for anoher FS94R, 4mix weedeater, 4mix edger).

PICTURES ALBUM:
http://imgur.com/a/cViDM

Stihl

$120 - MS210 - Aftermarket clutch cover. Swapped out quick adjuster for flathead adjuster, only one bar stud.
$140 - MS180C - All stock. Looks great, sparingly used.
$280 - MS260 Pro - All stock. Very clean saw. Tore it down to replace intake boot, looks great, cleaned it up. Only kink on it is that the upper shock mount is so-so.
$220 - 028 Super - All OEM. Fine saw.
$180 - 028 WB - Aftermarket Coil. Runs good.
$300 - MS360 - All OEM.
$360 - MS361 - Farmertec oiler to C-clip. Chain brake not working. Otherwise everything else is OEM. Runs great. Few extra parts I'm tossing in with it (drilled muffler, OEM clutch).

Husqvarna

$200 - Husqvarna 55, extra 55 parts - Saw isn't running right. It cranks and starts, but there's either an air leak on fuel line, tank vent is bad, or the clutchside seal is leaking.
$300 - Husqvarna 268 - Clean 268. Runs great. Rear Av springs are gone.
$400 - 372XP - All OEM.


Poulan Super 68 Bow Saw - Got this on a partial trade, cleaned and rebuilt carb, and installed new fuel lines, piston is smooth, runs good. No idea what to ask for it, go nuts.

 

[Modifiedmark]

I'm still waiting on the reply to the PM I sent a week ago. Just sayin..

 

[Modifiedmark]

I seen why I got no reply, it went on a fishing trip to ebay. Must have thought the red overspray was gold..

http://www.ebay.com/itm/Poulan-Supe...e=STRK:MEBIDX:IT&_trksid=p2060353.m1438.l2649

 

[Michael G]

I seen why I got no reply, it went on a fishing trip to ebay. Must have thought the red overspray was gold..

http://www.ebay.com/itm/Poulan-Super-68-Bow-Saw-Chainsaw-89CC/272829790796?ssPageName=STRK:MEBIDX:IT&_trksid=p2060353.m1438.l2649

"I have no idea what it's worth."

Don't mind the set price tag for that particular listing. At the very least, people on eBay make offers.

 

[Modifiedmark]

Yes if you set a starting point you probably will get offers. Are you rude to the ebay offers too or do you reply to them?

 

[Michael G]

Yes if you set a starting point you probably will get offers. Are you rude to the ebay offers too or do you reply to them?

Yeah but I knew if set that starting point here like some fellow did a while back, I'd get roasted. I just decided to cut it out here and throw it over there.

I'm not looking for that much, but I'm not looking to sell and get destroyed by shipping.

 

[COmedic]

Message sent.

 

[COmedic]

Still waiting on reply

 

[canam975]

I sent you a pm


Sent from my iPhone using Tapatalk

 

[COmedic]

Never got it. Inquiring about the Ms180, still available?

 

[hseII]

Do you still have the MS361?

 

[hseII]

Yeah but I knew if set that starting point here like some fellow did a while back, I'd get roasted. I just decided to cut it out here and throw it over there.

I'm not looking for that much, but I'm not looking to sell and get destroyed by shipping.

Have you ever sold anything on eBay?

 

[leeha]

Yes if you set a starting point you probably will get offers. Are you rude to the ebay offers too or do you reply to them?

I sent this seller a message way back in August about the 68 and never got a reply.
Sellers like him i'd rather not do biz with.

 

[hseII]

I sent this seller a message way back in August about the 68 and never got a reply.
Sellers like him i'd rather not do biz with.

You looking for a 268 Unc?

@TermiteBuffet

 

[LonestarStihl]

I message him 9/26 about his 038mag and haven’t heard back either. Hang it up boys he gone

 

[Hows57]

I sent this seller a message way back in August about the 68 and never got a reply.
Sellers like him i'd rather not do biz with.

Put together one hell of an add. Profile says he's 19 years old. Probably got caught watching sawporn by the folks and got grounded from the internet.

 

[leeha]

You looking for a 268 Unc?

@TermiteBuffet

I was interested in the Poulan Super 68.

 

[hseII]

I was interested in the Poulan Super 68.

Of Course!

 

[Modifiedmark]

I was interested in the Poulan Super 68.

As was I. I should clarify, I did get one reply, a worthless one though. But that was the end of it. I love it when they say they have no idea its worth, but they sure as hell decide a off the wall worth when they stick it on ebay.

The saw was missing parts and he jacked with the carb and it won't run. Sure that makes it worth a premium.

 

[leeha]

I kinda figured it was the same saw Mark. Can't believe he thinks it's worth that much.