• If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Want to Sell Husqvarna 181, 266, 55 & Misc. parts

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Mar 8, 2016
Messages
549
Reaction score
609
Location
north idaho
I've got a mix of some 181, 266, 55 and a few other random parts that I'd like to rid of. I'll post prices with the pictures. If you think the price is a little too high then make an offer. Prices do not include shipping. Parts are shipping out from north Idaho. I will start with the 181 parts and move down the list.

Sent from my SM-N970U using Tapatalk
 
181 parts. Some of this stuff will also work on 281's and 288's. Crankcase in in good shape, can detect any play in the crank bearings. Lower con rod bearing looks ok and there is very little play. Crank has some staining. Has some good chain rash on pto side case. SEM coil and triggering unit in good shape. Starter works great and is in great shape. Fuel tank is in good shape, no cracks or leaks.

Crankcase $60
Tank Sold
SEM Coil & Triggering Unit Sold
Starter $40
Flywheel shroud $8

5229c2907c847788d3116e09487db7b0.jpg
991123cb5d966549a6c0900f5a820698.jpg
edc509f435fa2df6b9705ebc6869c9b5.jpg
bcdb1cfa1344001a8fb4a97b2c87d8a4.jpg
c5834fd391780a82c5b965449487c99e.jpg
d5bbbcb635c9fecf6d678b8f8caacef6.jpg


Sent from my SM-N970U using Tapatalk
 
Two 266 crankcases. One on the right has shot crank bearings. The one on left has a wee bit of play in pto side bearing. Con rod on right case has a little bit of play but should be usuable. Con rod on left case has very little play. No cracks or breaks in either. Both tanks are in good shape and don't leak. One is plastic and the other is an old metal tank. Starter is complete and works well. One coil and unit is SEM and the other is Prufrex. Clutch, drum and sprocket are good. One clutch is good to go and the other has some cracks developing in the main hub.

Crankcases $65 each
Plastic tank Sold
Metal tank $50
Clutch Sold
Clutch Drum w/ rim Sold
Starter $40
Flywheel shroud $5
SEM Coil & Unit Sold
Prufrex Coil & Unit $30

a570169a86e533c421e82e7c7776cb9a.jpg
bb82799ba46ee21f6246c7ba63ab19ca.jpg
68bb1daae41b85d05fcc02910fb9df27.jpg
71a780a847e38cfa6f57100080cb06b8.jpg
38a4e439ce1e7d26388974414aeb7744.jpg
b090c6f4636da1fa583156073a666db9.jpg
1c6b25b082c7d9fd694af5dc57e024e8.jpg
8dbc70217aec42d586da21a02c3f00db.jpg


Sent from my SM-N970U using Tapatalk
 
Any idea if the 266 coils are good or not?

Which threading on the good clutch?
I tested primary and secondary resistance on all coils/trigger units and all passed. Never mounted them up on my 266 to test voltage though as none of the saws had a history of ignition issues and I feel good about them. However if I end up eating my words and one isn't good I'll refund all moolahs. Clutch is a left hand thread.

Sent from my SM-N970U using Tapatalk
 
Some misc. stuff. Probably best to assume all three carbs will need a cleaning or a kit.

372 Xtorq intake $15
181,281,288 Intake elbow 1 NOS $20 and 1 Used $10
181,281,288 Oiler worm gear 8 NOS $6 each
NOS Recoil rotor pulley PN: 501794401(42, 238, 242, 246 saws) Sold
266 Oiler worm gear w/ washer (2 sets) Sold
266 Intake manifold w/ rubber shroud Sold
181 Intake manifold w/ shroud $13
181 Carb. Tillotson HS216C $30
266 Carb. Tillotson HS224 Sold
61/162(Maybe more?) Carb Walbro WS17A $25
181,281,288 Intake Stack $15 (Allows you to run a K&N filter)

e19d49740dc686273aad2666887345ca.jpg
79eaae01ee3163773b9cd73f2ac76128.jpg
f436d6a41b6ffb5b00fe28284d493cc9.jpg
fb26d6656d575426699f88747cea0233.jpg


Sent from my SM-N970U using Tapatalk
 
I tested primary and secondary resistance on all coils/trigger units and all passed. Never mounted them up on my 266 to test voltage though as none of the saws had a history of ignition issues and I feel good about them. However if I end up eating my words and one isn't good I'll refund all moolahs. Clutch is a left hand thread.

Sent from my SM-N970U using Tapatalk

Sounds good. I'm interested in some of those parts, especially the coils. I'll check my growing 266 collection and see what may be needed. Might be a couple days, as I'm cutting firewood on my days off.


Also interested in the carb, worm gears, manifold parts, and the 42/242 rotor
 
I have two 266 cylinders and one 55 cylinder here. Both 266 cylinders are sold. The 55 cylinder has some light transfer around the exhaust but should clean up easily. Pay for shipping and I'll send it.
d4595928aa66a466832c6b87cd550700.jpg
c03c6466d9557b7f49b8e82f15e0de1d.jpg


Sent from my SM-N970U using Tapatalk
 
266 and 181 pistons. Both 181 pistons are A pistons. 266 Mahle piston had some transfer but came off easy. I checked it against a used cylinder and piston to cylinder wall clearance was .0025, which is close to factory new specs. It will need a new ring however. $20
There is one 181 Mahle piston and one KS piston. The Mahle piston is well used and has a piston to cylinder wall clearance of .0055. It's not great but it's usable, I highly recommend getting a new ring for it. $10
The 181 KS dual thin ring piston has some wear but is a little better than the Mahle. Piston to cylinder wall clearance is .0045 and overall in good shape. This came out of a running 181 which had decent compression. $15
6404e2795f724d061aa5da23a57d8dea.jpg
4c2001424451509fefa9600b0fb79350.jpg
4b526ae03a14bd566c0b47767e59c836.jpg
e0a2e148e4a7f916cefaa24a00ec8156.jpg
09a56fd2b5e6aaf964ab5fb616a66514.jpg
024c87f297c4ba2e31f4910306baeab5.jpg


Sent from my SM-N970U using Tapatalk
 
Some misc. stuff. Probably best to assume all three carbs will need a cleaning or a kit.

372 Xtorq intake $15
181,281,288 Intake elbow 1 NOS $20 and 1 Used $10
181,281,288 Oiler worm gear 8 NOS $6 each
NOS Recoil rotor pulley PN: 501794401(42, 238, 242, 246 saws) Sold
266 Oiler worm gear w/ washer (2 sets) Sold
266 Intake manifold w/ rubber shroud Sold
181 Intake manifold w/ shroud $13
181 Carb. Tillotson HS216C $30
266 Carb. Tillotson HS224 Sold
61/162(Maybe more?) Carb Walbro WS17A $25
181,281,288 Intake Stack $15 (Allows you to run a K&N filter)

e19d49740dc686273aad2666887345ca.jpg
79eaae01ee3163773b9cd73f2ac76128.jpg
f436d6a41b6ffb5b00fe28284d493cc9.jpg
fb26d6656d575426699f88747cea0233.jpg


Sent from my SM-N970U using Tapatalk
Do you happen to have the 61/162 carb still?
 
Back
Top