Husqvarna 262xp has too much bar oil coming out

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

EZuber91

New Member
Joined
Apr 7, 2021
Messages
4
Reaction score
0
Location
conneticut
Hi everyone, I have a 1994 husqvarna 262xp. The last time I ran the saw was about 2 months ago and had nothing wrong with it. Fired it up today (10/13/2021) and noticed way too much bar oil coming out. I was wondering if there’s an adjust for that on the saw? I see the plus and minus indicators but no screw to adjust. Can there be a bigger issue if there isn’t an adjuster screw?
Thanks,
Erik
 

Attachments

  • FC317A5A-0966-4459-B647-0217166ED682.jpeg
    FC317A5A-0966-4459-B647-0217166ED682.jpeg
    2.1 MB · Views: 7
there is an adjuster hiding behind the clutch drum...straight blade screw driver (the "tuning" one works well here) used in the "groove" between the plus and minus
 

Latest posts

Back
Top