• If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Sold Husqvarna 288XP

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Mar 8, 2016
Messages
549
Reaction score
609
Location
north idaho
Hey everyone. Got another saw I'd like to sell. I rebuilt this 288 a few weeks ago. I was going to keep it but it's time to thin out some saws. Don't get me wrong it has a lot of power and I like it but I'm just not real attached to it. I'm going to list out the work I did to it but if you have a question about something please ask. Parts and work done are as follows:

New SKF crank bearings
New oem oil seals
Original KS cylinder cleaned up
New old stock oem piston
All gaskets and o-rings are new
New pull cord & handle
New flywheel air conductor shroud
New ign. coil lead wires
New on/off switch
New spark plug
Rebuilt tillotson carb.
New K&N air filter
New fuel & oil caps
All anti-vibe mounts except for seventh mount are new
Muffler has been modified and is dual port with fresh ceramic high temp paint
New chain brake band
New rubber chip flap
New clutch springs
New clutch needle bearing
New 8 pin 3/8 sprocket
Wrap handlebar tig welded on flywheel side

Cylinder did have some transfer on exhaust side when I got it but it cleaned up without too much trouble. Piston to Cylinder wall clearance after the clean up is .0035. Wrap handlebar had a break on the flywheel side but has been tig welded and seems pretty solid. Exhaust port has been polished but otherwise Cylinder porting is stock. Chain brake works great! High top cyl. cover is in great shape, no cracks or breaks. Comes with an older style 28" hooskie bar and full skip chain with a lot of life left. Bar is straight and has clean rails and good sprocket tip. This saw runs great and is a real power house. It's sure to make its new owner happy! I've very happy with how this one turned out and would like to see it go to a good home. Asking $650 shipped. Before it leaves here I can put the spark arrestor screens back on the muffler if you so choose. Thanks!
3fd4796ce2ef6d383b05c40891789807.jpg
4bf25282b7c2ad897a4079b047b9c731.jpg
d0c08a0220c9dc48e562ffb7fceca5f0.jpg
612f588c34db6f683e4e184bcca21a5d.jpg
57dc0eab1caf022916c7bd9d7c52b866.jpg
fb707c60b31a883c02d26dfad8bc2ebf.jpg
2a7f991858a07ddc2dce72b7c60ec1b6.jpg
a16dbc1a3c0e777fa2b9c313482dd73e.jpg
940993c274cf80c3fdbc6e5bb14ed669.jpg
8ab521533225193fcda9db4d9a7d3795.jpg


Sent from my SM-N970U using Tapatalk
 

Latest posts

Back
Top