• Notice to all BUYERS. You are buying at your own risk. If you do not know the seller then please be cautious and look for suspicious activity. If they ask you to mail a check/money order or pay with PayPal using the Friends and Family option, that is a RED FLAG. Your purchase will not be protected. Only pay with credit card or PayPal using the goods and services options. Do not fall for the excuse that they don't want to pay the PayPal fees. They need to account for that in their sales price.
  • To all USERS that think they need to police the site. New users that come to sell items are not always selling stolen merchandise. No vigilante or lynch mob mentality is permitted. You will be given infraction points if you accuse someone of selling stolen merchandise without hard evidence. You must have the stolen item report with a serial number and/or pictures that match the for sale item to make such accusations. Alert the moderators with your evidence and they will take care of any transgressions. If you do not you will be given enough points for a 3 day time out.
  • We have started a new forum dedicated to user/instruction manuals. This is a repository forum and each new thread must contain the manual the thread is about. Please read the sticky. This is a community effort so if you have a manual, please help. https://www.arboristsite.com/forums/chainsaw-equipment-manuals.170/

Want to Sell Husqvarna saws, Wright B520, McCulloch parts Early spring cleaning

northwest saws

northwest saws

ArboristSite Operative
Joined
Mar 8, 2016
Messages
428
Location
north idaho
Hello there folks. I've started spring cleaning a little early this year and would like to sell a few saws and parts to make some space. First is the husqvarna saws. I've got four L65's and one 140s. One of the L65's is a runner, two fire on a prime and the other is a parts saw that I haven't tried to fire. The 140s fired on a prime.
Wright B520 reciprocal saw is sold.
As for the McCulloch parts I have a 4-30 carcass, a two man auger and a few 1-51 parts. I have a couple auger bits too but I'm going to have to do some searching to find them. I take paypal and am good with reg. goods n services or friends & family. Prices will be included with pictures. I would really like to clear all this stuff out though so if you think the price is high then make an offer....and no the 056 in the corner of the main pic is not for sale.
99819fd2765566788365fa1e4ab3b43e.jpg


Sent from my SM-N970U using Tapatalk
 
northwest saws

northwest saws

ArboristSite Operative
Joined
Mar 8, 2016
Messages
428
Location
north idaho
L65 No.1 *Updated Complete and runs decent but compression is at 130psi. Oiler works, starter works, on/off switch works. One of the starter mounts is busted off. I made a few cuts with it and it did alright. Definitely needs some tlc though. Would make for a good project. $75 obo.
a0ce5a1687158f7c5377e2294dc410e8.jpg
e27786b03f7934d63fa9a0ea65cb35b0.jpg
548033334b95712dc2b9869b004ea4f8.jpg
25123e9f47b5000cda45c59b7f032415.jpg


Sent from my SM-N970U using Tapatalk
f0f783d4b7f4e3fef7679be16e77ccc0.jpg

View attachment 892916
 
northwest saws

northwest saws

ArboristSite Operative
Joined
Mar 8, 2016
Messages
428
Location
north idaho
L65 No.2 Very good physical condition. Missing a little paint on clutch cover and a little dirty though. Got it to fire on a prime, didn't try to run it off of the tank. Gas tank is nasty and will need a good cleaning. Carb most likely will need a kit put in. Has good compression at 152psi, piston also looks good from exhaust side. $60 obo.
d8934e97ef44cac46bb12f534aa6406a.jpg
1ea6163025d8d5653df798c161c665a3.jpg
f2cbc532bd5c669b44ef9f63047aa2ba.jpg
28c528d21b292517bf440d457cf4b0fd.jpg
bfcc01fb6b9ea728c88260653f6db26d.jpg


Sent from my SM-N970U using Tapatalk
e1123343c68384a74a2b9affabb18c33.jpg
 
northwest saws

northwest saws

ArboristSite Operative
Joined
Mar 8, 2016
Messages
428
Location
north idaho
L65 No.3 Got it to fire off a prime but won't run off the tank. Most likely needs a kit put in the carb. A little dirty but in decent physical condition. Compression is poor and at the minimum needs a new set of rings. Saw is complete. $50 obo
aec3d8d030bd19119c3fafb717838ad7.jpg
bea052f167355c29b2ebb6df8d8f4a48.jpg
167695ad7101ad8deb1e64dc0d62b298.jpg
d99357b61bcf1666bb372d4380ddf275.jpg


Sent from my SM-N970U using Tapatalk
 
northwest saws

northwest saws

ArboristSite Operative
Joined
Mar 8, 2016
Messages
428
Location
north idaho
L65 No.4 When it had a starter I got it to fire off a prime. No longer has a starter, muffler or air filter cover. Choke plate is busted. Piston has some wear, compression seems poor. $35 obo
793d9a7a21ddebf17de364dc93ace25c.jpg
600bc1f87958a931562cfc62129d2577.jpg
397790b348dc36563b99e2d682ec4257.jpg
17978c1101a47deede61a6910ec06077.jpg


Sent from my SM-N970U using Tapatalk
 
northwest saws

northwest saws

ArboristSite Operative
Joined
Mar 8, 2016
Messages
428
Location
north idaho
140s Saw is mostly complete,, it might be missing a few screws. Needs a new pull cord and most likely a kit put in the carb plus fuel line and filter. Got this to fire on a prime. Compression seems decent. $50 obo
416ca863314a00939a9280250cc8c62c.jpg
f3d6f83f69e47f95faeb40bf6fb7af39.jpg
688a58b5a9f097648df31dfffd250a24.jpg


Sent from my SM-N970U using Tapatalk
 
northwest saws

northwest saws

ArboristSite Operative
Joined
Mar 8, 2016
Messages
428
Location
north idaho
1-51 handle bar is a little rusty but intact. Flywheel cover has a crack at the lower right corner, crankcase side cover also has a crack near the upper middle. 4-30 handlebar also a little dirty and a little rust but intact. Flywheel is missing one fin. Not sure if the coil works. Spike is rusty but intact. Shoot me a offer.
cfa4e942d8eefdaab66d63a8caeeb4e4.jpg
ce7b3c4420931318d709e1d920995d3f.jpg


Sent from my SM-N970U using Tapatalk
 
northwest saws

northwest saws

ArboristSite Operative
Joined
Mar 8, 2016
Messages
428
Location
north idaho
4-30 carcass is pretty clean. The handle must have taken a hit at one point because it's been welded in two spots. Crank and rod look to be in great shape. Gears and clutch turn smoothly. Crankcase side cover has one tank mount that is busted. One tank mount on the clutch side is also busted. Make an offer.
95596d5d92654eba51ab7e375708200a.jpg
b854ad449d4db9a2950ea4df5d50fc6a.jpg
6408acd188da9ae9ba1eb5470fce5fbb.jpg


Sent from my SM-N970U using Tapatalk
02c6864dace7bf2bd57fb4101340691d.jpg
 
northwest saws

northwest saws

ArboristSite Operative
Joined
Mar 8, 2016
Messages
428
Location
north idaho
Mcculloch two man auger. The outside isn't in too bad of shape buy doest have a little rust. I couldn't get the gears to turn, it's siezed up pretty good. Pretty sure I have an auger bit or two somewhere here but I'll have to find em. Make an offer.
ac9c9d6d4a95db5f7a2080053dd057c3.jpg
f27428da9b38a56a426f93bf26285136.jpg
98e7eda389b3ab2afb3e587147d5b0ce.jpg


Sent from my SM-N970U using Tapatalk
 
Maintenance supervisor

Maintenance supervisor

Every 100yrs, All new people...
Joined
Feb 1, 2019
Messages
3,082
Location
South Carolina
L65 No.3 Got it to fire off a prime but won't run off the tank. Most likely needs a kit put in the carb. A little dirty but in decent physical condition. Compression is poor and at the minimum needs a new set of rings. Saw is complete. $50 obo
aec3d8d030bd19119c3fafb717838ad7.jpg
bea052f167355c29b2ebb6df8d8f4a48.jpg
167695ad7101ad8deb1e64dc0d62b298.jpg
d99357b61bcf1666bb372d4380ddf275.jpg


Sent from my SM-N970U using Tapatalk

L65 No.3 Got it to fire off a prime but won't run off the tank. Most likely needs a kit put in the carb. A little dirty but in decent physical condition. Compression is poor and at the minimum needs a new set of rings. Saw is complete. $50 obo
aec3d8d030bd19119c3fafb717838ad7.jpg
bea052f167355c29b2ebb6df8d8f4a48.jpg
167695ad7101ad8deb1e64dc0d62b298.jpg
d99357b61bcf1666bb372d4380ddf275.jpg


Sent from my SM-N970U using Tapatalk
@ Weimdog might be interested?
 
northwest saws

northwest saws

ArboristSite Operative
Joined
Mar 8, 2016
Messages
428
Location
north idaho
On the Wright saw, have you lifted the throttle or put on fast idle while checking for spark? On that one, throttle all the way down kills the spark.
Yes on both. I actually did get a little spark once or twice but then never again. The issue most likely lies behind the trigger but I haven't investigated.

Sent from my SM-N970U using Tapatalk
 
northwest saws

northwest saws

ArboristSite Operative
Joined
Mar 8, 2016
Messages
428
Location
north idaho
Wright is sold but the husqvarna saws and mcculloch parts are still available. L65 posts no.1 and 2 updated. I found a bent throttle rod on the runner L65 which turned out to be the cause of the erratic running. Bent it back into proper position and the saw runs pretty decent now. Took compression readings on L65 no.1 and 2. Will get readings for the other three soon.

Sent from my SM-N970U using Tapatalk
 

Latest posts

Top