• If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Want to Sell Husqvarna saws, Wright B520, McCulloch parts Early spring cleaning

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Mar 8, 2016
Messages
549
Reaction score
609
Location
north idaho
Husqvarna saws and Wright reciprocal saw are sold. As for the McCulloch parts I have a 4-30 carcass, a two man auger and a few 1-51 parts. I take paypal and am good with reg. goods n services or friends & family. Prices will be included with pictures.
99819fd2765566788365fa1e4ab3b43e.jpg


Sent from my SM-N970U using Tapatalk
 
1-51 handle bar is a little rusty but intact. Flywheel cover has a crack at the lower right corner, crankcase side cover also has a crack near the upper middle. 4-30 handlebar also a little dirty and a little rust but intact. Flywheel is missing one fin. Not sure if the coil works. Spike is rusty but intact. Shoot me a offer.
cfa4e942d8eefdaab66d63a8caeeb4e4.jpg
ce7b3c4420931318d709e1d920995d3f.jpg


Sent from my SM-N970U using Tapatalk
 
4-30 carcass is pretty clean. The handle must have taken a hit at one point because it's been welded in two spots. Crank and rod look to be in great shape. Gears and clutch turn smoothly. Crankcase side cover has one tank mount that is busted. One tank mount on the clutch side is also busted. Make an offer.
95596d5d92654eba51ab7e375708200a.jpg
b854ad449d4db9a2950ea4df5d50fc6a.jpg
6408acd188da9ae9ba1eb5470fce5fbb.jpg


Sent from my SM-N970U using Tapatalk
02c6864dace7bf2bd57fb4101340691d.jpg
 
Mcculloch two man auger. The outside isn't in too bad of shape buy doest have a little rust. I couldn't get the gears to turn, it's siezed up pretty good. Pretty sure I have an auger bit or two somewhere here but I'll have to find em. Make an offer.
ac9c9d6d4a95db5f7a2080053dd057c3.jpg
f27428da9b38a56a426f93bf26285136.jpg
98e7eda389b3ab2afb3e587147d5b0ce.jpg


Sent from my SM-N970U using Tapatalk
 
L65 No.3 Got it to fire off a prime but won't run off the tank. Most likely needs a kit put in the carb. A little dirty but in decent physical condition. Compression is poor and at the minimum needs a new set of rings. Saw is complete. $50 obo
aec3d8d030bd19119c3fafb717838ad7.jpg
bea052f167355c29b2ebb6df8d8f4a48.jpg
167695ad7101ad8deb1e64dc0d62b298.jpg
d99357b61bcf1666bb372d4380ddf275.jpg


Sent from my SM-N970U using Tapatalk

L65 No.3 Got it to fire off a prime but won't run off the tank. Most likely needs a kit put in the carb. A little dirty but in decent physical condition. Compression is poor and at the minimum needs a new set of rings. Saw is complete. $50 obo
aec3d8d030bd19119c3fafb717838ad7.jpg
bea052f167355c29b2ebb6df8d8f4a48.jpg
167695ad7101ad8deb1e64dc0d62b298.jpg
d99357b61bcf1666bb372d4380ddf275.jpg


Sent from my SM-N970U using Tapatalk
@ Weimdog might be interested?
 
On the Wright saw, have you lifted the throttle or put on fast idle while checking for spark? On that one, throttle all the way down kills the spark.
Yes on both. I actually did get a little spark once or twice but then never again. The issue most likely lies behind the trigger but I haven't investigated.

Sent from my SM-N970U using Tapatalk
 
Wright is sold but the husqvarna saws and mcculloch parts are still available. L65 posts no.1 and 2 updated. I found a bent throttle rod on the runner L65 which turned out to be the cause of the erratic running. Bent it back into proper position and the saw runs pretty decent now. Took compression readings on L65 no.1 and 2. Will get readings for the other three soon.

Sent from my SM-N970U using Tapatalk
 
Hello there folks. I've started spring cleaning a little early this year and would like to sell a few saws and parts to make some space. First is the husqvarna saws. I've got four L65's and one 140s. One of the L65's is a runner, two fire on a prime and the other is a parts saw that I haven't tried to fire. The 140s fired on a prime.
Wright B520 reciprocal saw is sold.
As for the McCulloch parts I have a 4-30 carcass, a two man auger and a few 1-51 parts. I have a couple auger bits too but I'm going to have to do some searching to find them. I take paypal and am good with reg. goods n services or friends & family. Prices will be included with pictures. I would really like to clear all this stuff out though so if you think the price is high then make an offer....and no the 056 in the corner of the main pic is not for sale.
99819fd2765566788365fa1e4ab3b43e.jpg


Sent from my SM-N970U using Tapatalk
Wouldn't happen to have any L65 Parts or Saws Left would you
 
Back
Top