As the title states I've got a good running 2-10 for sale. I went through this saw awhile back intending to keep it for awhile. My situation has changed and I've got to let go of a few saws so this is up on the chopping block. To start I replaced the tank gasket with a good viton gasket and replaced the gas cap cork gasket with a viton o ring. I rebuilt an SDC18 carb and put that on there with a smaller fuel inlet barb. Did a fuel line fix with grommet and tygon line. All insulator and carb spacer gaskets are new. I picked up a new old stock muffler for the saw but left out the internal spark arrestor baffle. Needless to say it's pretty loud! I put a new clutch needle bearing on with a good floating rim 3/8" drum and sprocket. The starter has a new rewind spring and plastic bushing and works great! The 20" mac bar is one I took off a 610, it has a good sprocket tip and is in good shape! The chain is 3/8" pitch in full skip sequence and hasn't seen much use. Both the auto and manual oilers work as they should. Saw still has very good compression and cuts great! I've really enjoyed using this saw. Time for someone else to enjoy it. Asking $100 plus actual shipping to your door. Also willing to sell the powerhead only. Any questions just let me know. Thanks
I'm going to keep the custom spike thats on it and replace it with the oem mcculloch spike.
Sent from my SM-N970U using Tapatalk
I'm going to keep the custom spike thats on it and replace it with the oem mcculloch spike.
Sent from my SM-N970U using Tapatalk
