• If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Sold Misc bars (UPDATED 1/22/2022)

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Woodslasher

Make McCulloch Great Again!
AS Supporting Member.
Joined
Jan 2, 2019
Messages
3,957
Reaction score
6,253
Location
Commiefornia
Here is a complete list of all the remaining bars I have for sale. The bars in the first picture are posted as a lot, from top to bottom there are a pair of old Homelite bars, a 17" Oregon D196 hard nose bar, a 20? inch McCulloch D176 bar, and a 24"? McCulloch D176 bar. I'd like to get $15 + the ride for all these, if they don't sell soon they'll either be scrapped or used as raw iron. In the 5th pic, from top to bottom, there's a 12"? 3/8LP x 0.050 bar/chain off an Eager Beaver, a 16" Oregon 3/8 x D009 bar, a 28" Oregon D025-mount 3/8 x 0.050 bar, and a 28" Oregon D196-mount 3/8 x 0.050 bar/chain combo that have been used for 2-3 cuts. I'd like to get $10 + the ride for the Eager Beaver bar, $10 + the ride for the 16" Oregon, $30 + the ride for the 28" Oregon D025 bar, and $50+ the ride for the 28" Oregon D176 bar/chain.
IMG_9858.jpegIMG_9859.jpegIMG_9860.jpegIMG_9861.jpegIMG_9862.jpegIMG_9863.jpegIMG_9864.jpegIMG_9865.jpegIMG_9866.jpeg
 
And lastly, a 24" Oregon D176-mount 3/8 x 0.050 bar/chain combo and a 36" Oregon D009-mount 3/8 x 0.063 bar. The slot has been lengthened on the 36", and there are a few extra holes, but it still works flawlessly on a Husky or a Remington SL-7 (which is what it was modified to fit). The 24" comes with a pair of good used Stihl chains, one that's chisel and one that's chipper. I'd like to get $30 + the ride for the 24" and $40 + the ride for the 36", but I'm open to offers.
IMG_9868.jpegIMG_9869.jpegIMG_9870.jpeg
 
The upper two bars in the first post have been scrapped and the 28" Oregon D025 bar is no longer for sale. However, I'll add this 28", 3/8 x 0.063 Stihl bar into the mix. I put a new oem Stihl tip on it a little bit ago and ran it on my 461 for a couple of tanks before I sold the 461. The brown stuff is residue from oak bark that didn't want to come off, not rust. I'd like to get $30 + the ride for this guy but I'm open to offers.
IMG_9982.JPGIMG_9983.JPGIMG_9984.JPGIMG_9985.JPG
 
Back
Top