Shawn1313 Live life to the fullest. Joined Dec 31, 2018 Messages 12 Reaction score 3 Location South Apr 12, 2020 #1 I have a 210 wondering if I can use a 42.5 mm piston and cylinder, it now has a 40mm. Bearing went out on the crank so I need to buy new anyway, Thanks,
I have a 210 wondering if I can use a 42.5 mm piston and cylinder, it now has a 40mm. Bearing went out on the crank so I need to buy new anyway, Thanks,
cus_deluxe Commie Satan turd Joined Apr 6, 2014 Messages 4,869 Reaction score 6,307 Location Northern Lower Michigan Apr 14, 2020 #2 im not sure, but i believe its the same chassis as ms250, so you should be able to install that, dont see why not
im not sure, but i believe its the same chassis as ms250, so you should be able to install that, dont see why not
Shawn1313 Live life to the fullest. Joined Dec 31, 2018 Messages 12 Reaction score 3 Location South Apr 15, 2020 #3 cus_deluxe said: im not sure, but i believe its the same chassis as ms250, so you should be able to install that, dont see why not Click to expand... Ok I’m going to try it. Thanks
cus_deluxe said: im not sure, but i believe its the same chassis as ms250, so you should be able to install that, dont see why not Click to expand... Ok I’m going to try it. Thanks
S sbc350 ArboristSite Operative AS Supporting Member Joined Jun 18, 2013 Messages 146 Reaction score 64 Location manitoba May 25, 2021 #4 025/ms250 will plop in. Inner swapping pistons rods and cylinders in another while different topic.