MS362 can't find a part.

[PaladinMan187]

So I got this mess of a 362 in a bunch of other saws and am trying to put it back together. There is one part I can't seem to find. Can anyone tell me what goes here in the middle of the rubber absorber as well as what hardware it needs? Thanks guys.

 

[Woodslasher]

Looks like you need p/n 1138 791 5903, it’s a rubber bushing that appears to slip in, then you pop in a plastic “mushroom” that locks it in.

 

[PaladinMan187]

The bushing I've got on the way. The plastic mushroom gizmo is what I can't seem to find. Any info on that component?

 

[HarleyT]

This?

 

[HarleyT]

Here.

 

[Woodslasher]

The bushing I've got on the way. The plastic mushroom gizmo is what I can't seem to find. Any info on that component?

Alrighty, you need p/n 1140 791 5901

 

[Woodslasher]

Here’s a listing for a good used one for $10:
https://www.ebay.com/itm/144244908009?hash=item2195aa9fe9:g:iakAAOSwRERhZldW
And here’s a new one for $16:
https://www.ebay.com/itm/233667748056?hash=item3667aee0d8:g:f2MAAOSw~rFgFrWp

 

[PaladinMan187]

Looks nothing like the other side but I'll believe you. Ordering now. Thanks for the help guys.

 

[PaladinMan187]

Here’s a listing for a good used one for $10:
https://www.ebay.com/itm/144244908009?hash=item2195aa9fe9:g:iakAAOSwRERhZldW
And here’s a new one for $16:
https://www.ebay.com/itm/233667748056?hash=item3667aee0d8:g:f2MAAOSw~rFgFrWp

That's the rubber bushing. The part I'm missing is the *mushroom* looking gizmo that screws/attaches to the crankcase. Bushing is for the rear handle. The missing part is the counterpart it mates to.

 

[HarleyT]

This is the tank, well it is the same part number.

 

[HarleyT]

 

[Woodslasher]

That's the rubber bushing. The part I'm missing is the *mushroom* looking gizmo that screws/attaches to the crankcase. Bushing is for the rear handle. The missing part is the counterpart it mates to.

I think it just snaps into the crankcase and presses against the tank, no screws necessary. Some bushings are more of a bump stop/limiter as opposed to something that actually attaches to both the tank and the case.

 

[PaladinMan187]

Sorry. I had it backwards. The part I need screws into the side of the tank you show in that pic.

 

[HarleyT]

Not seeing any screw.
I am not familiar with that model, to be honest.

 

[HarleyT]

Show a pic of the buffer you have.

 

[PaladinMan187]

I'll rip the coil off and take a pic of the other side in a bit. It should be the item or at least give you an idea of what I'm looking for.

 

[PaladinMan187]

Figured it out. The bushing is missing and it has a back plate made into it that a screw goes through and then into the rear handle assembly.