Need help fixing 25 ton log splitter

[shansen]

Unless your new valve has "ENERGY" cast in the valve body between the A & B workports and on the end of the detent cover, I can't help you.
Also, make certain the linkage between the control handle and the valve spool and handle bracket is set up like this. (It may be turned upside from this too as long as the linkage is correct.

 

[dave ensign]

Just reverse the two hoses going to the cylinder at the valve.

 

[Naptown]

Just reverse the two hoses going to the cylinder at the valve.

I was hoping there was something I would turn around or flip instead of having to do this. I'll likely have to buy more fittings/hose to swap the 2 hoses.
Thank you for your response though.

 

[dave ensign]

Is your valve handle going in the right direction? Yes you have to reverse the lines.

 

[Yarz]

Do you have a handle/valve end that looks like this?

I THINK you can remove those 2 cap screws and rotate the end of the valve to make the handle operate the valve in the opposite direction.

 

[shansen]

Yarz is right, that's what I was trying to convey. I never got a response if this is an Energy valve or not. You can also use the other non-used hole in the handle in Yarz's photo to come up with other configurations. Enjoy your Mother on Mother's Day.