Thanks Mark. That odd DL count is something to be aware of for certain. Something I forgot. Curiously, I’ll have to go and check the mid 70’s Windsor chart I have to compare the DL counts for the UXL (Homelite vs Pioneer). I can’t recall off of the top of my head, but the DL count for the 24” UXL on a 7-pin (Homelite setup) was different than the common 8-pin spur equipped from the Terry factories. One link too short for the 8’s. I know some of the P-series came with 7 or 8’s depending on half/full wrap setup. Don’t know if the similar DL differences occur when swapping between 7 or 8’s on the Pioneers. I’ve never run any 8’s on them. I’ve never actually seen a proper Oregon D007 mount up here. Seems Windsor was the big winner at the Canadian factories and for imports. UXL on pretty much every Homelite, Poulan, Echo and Pioneer I’ve ever picked up. Different bar plates when needed and stud spacers for the 5/16”. Good steel on those old Windsor’s too. Modern Oregon’s seem to have lost that important detail.