Patrick1903
ArboristSite Operative
Located in Central Virginia, between Richmond and Charlottesville.
Estimated less than 100 hrs. of usage
Trailer 5’ x 8’
Honda 18hp GX610 engine, runs well.
Bandsaw 144” x 1 1/4” saw
Cutting capacity 23” width, 10’ long
We have owned this setup for about 5 years. It was built by a local Votech teacher. The drive system on the mill needs some work, as the blade slips when in harder wood. Can currently cut softer woods. Believe it to be caused by the welded pulley on the drive wheel, being not smooth enough or corroded, belt not making good contact there. Milling has taken a back seat to other priorities lately and the Alaskan mill works well enough.
I could also move it to the Fredericksburg VA area if that is easier for you to look at.
$1,800/obo. PM to discuss. Thanks.
Estimated less than 100 hrs. of usage
Trailer 5’ x 8’
Honda 18hp GX610 engine, runs well.
Bandsaw 144” x 1 1/4” saw
Cutting capacity 23” width, 10’ long
We have owned this setup for about 5 years. It was built by a local Votech teacher. The drive system on the mill needs some work, as the blade slips when in harder wood. Can currently cut softer woods. Believe it to be caused by the welded pulley on the drive wheel, being not smooth enough or corroded, belt not making good contact there. Milling has taken a back seat to other priorities lately and the Alaskan mill works well enough.
I could also move it to the Fredericksburg VA area if that is easier for you to look at.
$1,800/obo. PM to discuss. Thanks.
Attachments
-
EC148F2D-551A-449C-8FE0-5B3009E22D96.jpeg -
8E966113-8B35-47B1-BD7D-14A3464E5F5B.jpeg -
63E947B9-2B21-40A6-AF00-580A69099C23.jpeg -
DA2E78FF-8DE4-453B-96CE-371650B93182.jpeg -
C1058382-259B-4817-B378-909AAE211B1E.jpeg -
24CADF5C-ED7C-4404-AAF7-404E61062BB2.jpeg -
92386103-7A29-4598-9135-6183C7113620.jpeg -
561C174B-38F7-476D-B532-C25AA955308A.jpeg
