Remington Chainsaws(including Mall chainsaws)

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I’m pretty sure they will interchange.
@Woodslasher looks like the tail mount that came with/on my super 660. Thanks for the knowledgeable verification. Those big bars that are compatible with the remingtons are becoming harder and harder to find. Not the square hole d096/196 but the adjustment pin is round not square and this bar works on my 14 link/d096 saws. Thanks again! Much appreciated.
 

Attachments

  • 16425379103332666790484857320402.jpg
    16425379103332666790484857320402.jpg
    2.4 MB · Views: 3
Might have another great member (Bob kern) joining us in the Remington thread soon. He's a Mac guy but after some persuasion he got his 1st case of scarlet fever from me. A minty bantam:baba::baba::baba:
 

Attachments

  • Screenshot_20220120-181242_Chrome.jpg
    Screenshot_20220120-181242_Chrome.jpg
    228.1 KB · Views: 5
My Rem and Ward line up i'll get some cutting vids up of these,the last three are rebuilt crank seals,rings,hone job,cylinder gasket delete enjoy!
Wow sweet saws! I see a 754 in there :rock: and that Wards saw:baba: beautiful line up Ezra. I don't have nowhere near the repair skills you have yet, just thinking about the stuff you described in the post makes my head spin :dizzy: if I could do one of those repairs in the future I would be pretty impressed with myself. Great work and awesome skills on the repair side of things, thanks for keeping them old saws alive and cutting. Take care and thanks for sharing
 
Morning fellas, are the clutch drums the same for remington SL11A and PL4? it looks like yes they are but just double checking with the guys who are way more knowledgeable than I am. Looks like pl4, pl5, pl55 and sl11 are all the same. Thanks fellas!
 
Morning fellas, are the clutch drums the same for remington SL11A and PL4? it looks like yes they are but just double checking with the guys who are way more knowledgeable than I am. Looks like pl4, pl5, pl55 and sl11 are all the same. Thanks fellas!
Page from Herr sprockets catalog backs up your statement.
 

Attachments

  • NPA Sprockets6.pdf
    218.9 KB · Views: 7
Hey fellas, I was looking at a roller nose bar online, says 2815 KL on the bar so it's 17" my other bars say 2817 KH and they are .063 and 21" My other roller-nose bar I have that runs .058 says LG. All 3 roller noses on the bars have the same patent and part #'s even though 2 are .063 and 1 is .058 I'm having trouble finding out if the KL means .058 or .063 gauge. Any thoughts guys? Thanks!
 
Back
Top