Rima 31” Anyone else having issues

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Butter_Beard

"All probability is greater than zero."
Joined
Jun 6, 2015
Messages
13
Reaction score
4
Location
Detroit - Michigan
Well, I’ve got 17’ of useable track, each is square, level, and the left and right rails plane to each other, but on soft woods like 90 year old cedar, I’ve got some serious traveling in the cut, up and down turning at differing junctures.
Blade is properly tensioned, all guides working and everything set proper on the mill head itself. I just can’t figure out why it’s doing this.
 
Mine seems to be having the same issue. I just ordered some new blades from woodmizer, I hope this helps my problem. Have you figured out anything with yours?
 

Attachments

  • D807DA16-6075-4191-B256-B70A3C6801BB.jpeg
    D807DA16-6075-4191-B256-B70A3C6801BB.jpeg
    3.9 MB · Views: 0
Back
Top