Sachs Dolmar 102 (1988) Help needed for Gasket placement

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

MartDalb

ArboristSite Guru
Joined
May 22, 2017
Messages
939
Reaction score
403
Location
Denmark
Hi everyone

I got myself a Sachs Dolmar 102 from 1988 - very very well preserved and hardly used.

And yes, it was free - so why not spend some time and a little money to make it run again.

I have an issue with the gaskets for the carburator/cylinder side.
See pictures.

The Nr. 18 gasket, I have been provided with a metal ring, which does not seem to fit - seller told me it was the only ring for Dolmar saws he had - but that it might not be the correct part.

It seems, I think, that it fits between the 2 "gaskets" and the flange parts - but as you can see in the pictures, it is too wide to really...fit in between.


Does anyone have any idea, clue og tip to what/how this can be corrected.


:bowdown:
 

Attachments

  • Dolmar 102 part.png
    Dolmar 102 part.png
    100.3 KB · Views: 5
  • DSC_0266.JPG
    DSC_0266.JPG
    414.3 KB · Views: 4
  • DSC_0267.JPG
    DSC_0267.JPG
    493.8 KB · Views: 4
  • DSC_0268.JPG
    DSC_0268.JPG
    462.7 KB · Views: 4
Back
Top