Sawsrusinc
ArboristSite Operative
Sachs Dolmar 143 chainsaw power head. I got the saw to fire and run off a prime but it has been sitting for a very long time and will need to be gone through. The piston and cylinder look pretty good with a small bit of light scoring but it should clean up nicely. There are some epoxy repairs on the tank but the fuel tank does not leak and I did not see any leaks on the oil side but only had oil in it for the tiny bit I had it running. The rear handle also has a break in it up toward the throttle trigger. It would make a good project saw for someone. I would do 275 shipped anywhere in the lower 48 states.. Please PM if interested, Thank you
Attachments
-
DSCN1487.JPG3.8 MB · Views: 22
-
DSCN1488.JPG3.8 MB · Views: 23
-
DSCN1489.JPG3.9 MB · Views: 20
-
DSCN1490.JPG3.8 MB · Views: 14
-
DSCN1491.JPG3.8 MB · Views: 12
-
DSCN1492.JPG3.9 MB · Views: 12
-
DSCN1493.JPG3.8 MB · Views: 20
-
DSCN1482.JPG3.9 MB · Views: 19
-
DSCN1485.JPG4 MB · Views: 17
-
DSCN1486.JPG3.9 MB · Views: 16