1) I can.
2) I have a 32" for it but most of the time the wood I cut less than 20". So you think a 562 with a 20" will outcut AND out-noodle a 395 with a 20"? I think not. Take 18" long logs, turn them, noodle to quarters, stack on pile. Done.
3) I have a 3-saw plan. T540xp/12" b&c, 445/16"b&c (Soon to be a 550xp) and the 395. I dont want saws that are close in power. One tiny, one truely mid-size, and then the biggest. (3120 is too big)
4) I don't know if you have ever run a 395 but it balances perfect with a 20. It may not be what YOU would choose to do, but I fail to see the complete lack of logic in my arsenal.
I dunno Benp, I think 20in just gets a lot done for me. Grew up running 20in while cutting fire wood. I did find a 77cc Poulan Pro (Jonsered) on Craigslist for $100 I've seriously been considering grabbing, it has a 24 but I might put a 28 on it for "my big saw" Any of you fellas run a 2077 Red, or Partner 7700 or Poulan Pro 475?? I figure $100 for a 77cc saw, if it runs it is a good deal..... Unless you guys tell me that model is a turd....
Was running my smallest Husky today, the pallet pile at work was getting out of hand so the 136 got going and made some kindling for my woodstove. I keep the flats handy for the wife and just run the 2x4 sections in the stove for "free heat" Ive learned to run them wide open throttle so that they don't nasty up the chimney too much.
Little update on Bills wood pile, my jackass nephew that stepped up big on Saturday, he was supposed to finish the splitting yesterday... Still hasn't showed up. Bill asked me if I have heard from him, "nope, but ill fix his ass" quick call to my dad (he gives NO shits about hurting feelings) and I think the kid will be there tomorrow. Pops has never been one to sugar coat anything, he'll explain to my 20 year old nephew that real men don't say they are going to do something then back out. I was worried that the kid was just saying he'd show to make himself look good to my dad, pops told me to give him the benefit of the doubt. And I know, something might have come up, but NO CALL NO SHOW is BULL$HIT.
Looks like Saturday I'll be doing wood again, oh at my house too, having a load of logs dropped off too. Bartered one of my employees, his dad sells wood. Traded "take off wheels" for a load of logs, he said "you sure you don't want split wood" I said, will I get more wood in log form.... "yes" well I don't mind working, give me logs.
I'm completely confused. A 395 with a 20" bar is dumb as a bucking/noodling saw but a 394 with a 32" bar makes sense for limbing?
When you have a long bar you don't bend over... you just use the front 1/3 of the bar to limb with. You just can't be a moron and have kickback.
Ive seen it done, and I limb with my 20 bar the same way when I can get away with it, why bend over and stress lower backs?
That's too many different chains Mike.
Seems to me, if I recall correctly, on Sat when you me and your Dad bucked over 15 cord of wood, everyone used my saws as much as their own (or more). I know your Dad really appreciated a few of em, and I think you even wanted to take a Shihl home with you! (and yes, it had a 20" bar)!!!