Skil 1629 / 1631 chainsaw bar and chain

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Nedhlpp1

New Member
Joined
Aug 5, 2021
Messages
4
Reaction score
0
Location
Canada
Have a Skil 1629 or 1631 chainsaw hard to tell exactly as the paint on the saw was pealing of and the top cover is missing the id lable. The saw runs great now but the bar and chain were rusted together bad , does anyone know what size bar and chain will fit this saw? It look like a 14 " bar on it .the numbers on the bar as best I can make out are 227415 on one side and 3669 with an 8 below it On the other side. The chain is Oregon with 77 stamped on it.
Thanks in advance
 
Could it be 72 not 77 on the chain?

The tail of the bar needs to fit to the saw body. The sprocket needs to match the chain and nose of the bar if the bar has a nose sprocket. There may be sprocket choices. There may be different drive Link/bar groove or gauge to choose from. Looks like a common 3/8lp Oregon 041 set up from this link.

https://www.oregonproducts.com/en/p...lse&partFinderSawChainBarsSprocketsAnsi:false
 
Back
Top