• If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Want to Sell SOLDMcCulloch 7-10 automatic

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Oldtoolsnewproblems

ArboristSite Operative
Joined
May 20, 2020
Messages
267
Reaction score
139
Location
New England
Putting out feelers, if I get a good offer before I get a chance to fix it I wouldn't mind selling the saw. As is, condition unknown. I thought I was grabbing it to steal the bar for my Husqvarna, but the bar studs are too small so never mind. Looks like it was barely used, but also looks like it was stored by the ocean for 30 years. All the grime wipes off easy, but that corrousin is more than skin deep. Pull cord sticks but saw spins free, make an offer, buyer pays actual shipping cost
 

Attachments

  • IMG_20210901_233508883.jpg
    IMG_20210901_233508883.jpg
    3.5 MB · Views: 45
  • IMG_20210901_233858023.jpg
    IMG_20210901_233858023.jpg
    3.2 MB · Views: 43
More imgs
 

Attachments

  • IMG_20210828_121409312.jpg
    IMG_20210828_121409312.jpg
    5.1 MB · Views: 21
  • IMG_20210828_121414246.jpg
    IMG_20210828_121414246.jpg
    4.2 MB · Views: 20
  • IMG_20210828_121423459.jpg
    IMG_20210828_121423459.jpg
    4.2 MB · Views: 20
I'll take some more photos, but I only saw pitting, nothing fully corroded thru. The worst of the corrosion is the bottom of the bar mount cover plate
 

Attachments

  • IMG_20210828_121421789.jpg
    IMG_20210828_121421789.jpg
    5.2 MB · Views: 22
Not much, 18-26 is all I use, but a few of them have very worn grooves and should be retired but off the top of my head I can't remember which
 
Currently don't have anything in mind. I'd like to keep it and rebuild it but it's#3 in line for bench time, so if it's worth something to someone on here I might face the facts and abandon the project. If I get serious I'll add a price, otherwise feel free to make an offer here or by PM. I won't be offended by low-ball
 
Back
Top