Stihl 011av

[David L]

Rebuilding a Stihl 011AV chainsaw, have to replace the vent tube, I have a new, but was wondering what would be used to secure it in place, I was thinking of using Yama Bond or Dirko

 

[djg james]

I've used 'Seal All' on a gas tank once. JB Weld will probably work too. Supposed to be good for oily surfaces. You didn't have to replace the carb did you? I have a 011 that needs one and I can't find an OEM or a reliable aftermarket.

 

[David L]

I've used 'Seal All' on a gas tank once. JB Weld will probably work too. Supposed to be good for oily surfaces. You didn't have to replace the carb did you? I have a 011 that needs one and I can't find an OEM or a reliable aftermarket.

 

[David L]

Hello, I have a the one I pulled off the Stihl 011av that I am working on its a Walbro WA 99 if you are interested.

 

[David L]

Have the one I pulled off the Stihl 011av that I am working on if you are interested. Could use a good cleaning, really don't know if it is good or not as I had another one that I knew was good, using it instead.

 

[David L]

If by chance you have a stihl 011av carb, air filter cover in good condition maybe we can swap.

 

[djg james]

If by chance you have a stihl 011av carb, air filter cover in good condition maybe we can swap.

Sorry for the delay in getting back to you. Yard work before the rain. I only have the one 011 saw and I don't have any spare parts. As for the used carb you have, I'm going to have to think about it. I don't want to possible have to work on another carb. But I might change my mind if I can't find one.
Thanks

 

[David L]

Sorry for the delay in getting back to you. Yard work before the rain. I only have the one 011 saw and I don't have any spare parts. As for the used carb you have, I'm going to have to think about it. I don't want to possible have to work on another carb. But I might change my mind if I can't find one.
Thanks

Okay thanks. I'll take the carb apart and thoroughly clean it and replace the diaphragms and gaskets in it as I have a new carb kit to do it. I will also pull out the high and low screws and clean them up as well and reset them to 1 turn out, I have the work shop manual for the Stihl 010av and 011av chainsaw. Just sold a complete rebuilt Stihl 011AV that I had and did and have a power head for another Stihl 011AV that I am fiddling with and just putting it back together so I can sell it as well. Put a new piston and ring on it and the cylinder was not scored at all.