Stihl 034 / 036 dual dawgs / spikes part numbers?

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Gents, can anyone confirm these part numbers for 034 / 036 dual spikes ?
1110 664 0501.
1128 664 0500.
1110 is ms 260
1128 is is ms 380/381/038.
I'll check the #s on mine when i get to the shop. I'm thinking the spike #'s are the same except starting with 1125 for the 036. @SAWMIKAZE has posted about these but i can't find the post with the correct #'s.
 
1110 is ms 260
1128 is is ms 380/381/038.
I'll check the #s on mine when i get to the shop. I'm thinking the spike #'s are the same except starting with 1125 for the 036. @SAWMIKAZE has posted about these but i can't find the post with the correct #'s.

I purchased a MS361 new ten years ago, it only had an inner spike at the time (1110 664 0501 c ), I replaced the spike with a dual set, I think the part number for the dual set was 1135 650 7750, I'm thinking this set should also fit 034/036 saws?
 
View attachment 643245 these are the new style that fit the 036/361/362/260/261 as well.

Not the best pic, but here's the 361 with the dual spike fitted......I think the part number for this kit was 1135 650 7750?

View attachment 761257
Yes that should fit the 036. Found this post below. New style doesn't have the roller catcher.
View attachment 643245 these are the new style that fit the 036/361/362/260/261 as well.
 
This 1135 650 7750 kit is used on MS 341, 361, 362.

The spikes with number 1110 664 0501 and 1128 664 0500 are used on the 034, 036.

1128 664 0500 is used on the 036 BR
1110 664 0501 is used on 036, 036 Arctic, 036 PRO, 036 W, 036 WVH
 
Why do you want dual dawgs on a 034/036 anyway? Single maybe, all my 50cc and smaller don't have any.

I use my 034 for dry firewood up to 16" diameter, I can understand not running spikes if the saw was used for trimming green limbs, but not for what I need ......I think these pics best illustrate why I like of spikes.
Red Gum 001.JPG Red Gum 002.JPG
 
IMHO one set of spikes is fine in a 034/036.

But what do I know, only had two 036 for > 20 years in big and small wood...

Biggest tree I dropped was a 54" dbh ash, with an old super xl auto homie w/24" bar. It didn't have ANY spikes.........
And that’s why you Don’t want them........you asked.....lol
 
IMHO one set of spikes is fine in a 034/036.

But what do I know, only had two 036 for > 20 years in big and small wood...

Biggest tree I dropped was a 54" dbh ash, with an old super xl auto homie w/24" bar. It didn't have ANY spikes.........

If that's what works for you, that's great!.......I started this thread asking for information on part numbers, not to start a pissing contest about who's right or wrong......Move on!
 

Latest posts

Back
Top